CA91

CMOS AccelArray

■DESCRIPTION AccelArrayTM*isanewstructuredASICfamily,offeringshortdevelopmenttime,andlowdevelopmentcostwithpre-diffusedIPmacrosintobasemastersandpre-designedcommon3to4metallayersoutof6to7layers.Byusing0.11µmCMOSprocesstechnology,thedevicescansuppor

CA91

CMOS AccelArray™; • High-speed, large scale ASIC produced in short development time:\n  TAT = One third compared with Standard Cell ASICs (target value)\n• Uses an architecture that simplifies physical design tasks.\n• Pre-designed common masters with IR-drop free.\n• Pre-designed test circuit insertion to reduce test synthesis tasks.\n• Uses a dedicated timing-driven layout tool to reduce development time.\n• Signal Integrity Free (pre-designed main clock trees without design verifications)\n• Max built-in gate number : 6,000,000 gates or more\n• Technology : 0.11 µm Silicon gate CMOS, 6 to 7-metal layers (wiring material: copper), low-k inter-layer film\n• Internal cells support high-speed operation\n• Power supply voltage : +1.2 V ± 0.1 V/2.5 V ± 0.2 V (Dual power supply. Needs 1.5 V power supply during using HTSL.).\n• Operation junction temperature : −40 °C to +125 °C (standard)\n• Max operating frequency: 333 MHz (internal circuit)\n• Support for fast interface/macro (200 MHz/400 MHz DDR I/F, 2.5 Gbps PCI Express, 3.125 Gbps XAUI, etc.)\n• Special interfaces (P-CML,LVDS,PCI,HSTL,SSTL-2, etc.)\n• Embedded macro : PLL, SRAM\n• 8-channel clock supply system incorporating a PLL\n• Supports Memory-BIST/Boundary-SCAN\n• Package : FC-BGA (729 pins to 1681 pins)\n• ARM core is supported. ;

■ DESCRIPTION\nAccelArrayTM* is a new structured ASIC family, offering short development time, and low development cost with pre-diffused IP macros into base masters and pre-designed common 3 to 4 metal layers out of 6 to 7 layers. By using 0.11 µm CMOS process technology, the devices can support 6 million logic gates, 4.55 Mbits SRAM and 3.125 Gbps high speed transmission macros. Ultra-high pin count FC-BGA (up to 729 pins to 1681 pins) packages are available.■ FEATURES\n• High-speed, large scale ASIC produced in short development time:\n  TAT = One third compared with Standard Cell ASICs (target value)\n• Uses an architecture that simplifies physical design tasks.\n• Pre-designed common masters with IR-drop free.\n• Pre-designed test circuit insertion to reduce test synthesis tasks.\n• Uses a dedicated timing-driven layout tool to reduce development time.\n• Signal Integrity Free (pre-designed main clock trees without design verifications)\n• Max built-in gate number : 6,000,000 gates or more\n• Technology : 0.11 µm Silicon gate CMOS, 6 to 7-metal layers (wiring material: copper), low-k inter-layer film\n• Internal cells support high-speed operation\n• Power supply voltage : +1.2 V ± 0.1 V/2.5 V ± 0.2 V (Dual power supply. Needs 1.5 V power supply during using HTSL.).\n• Operation junction temperature : −40 °C to +125 °C (standard)\n• Max operating frequency: 333 MHz (internal circuit)\n• Support for fast interface/macro (200 MHz/400 MHz DDR I/F, 2.5 Gbps PCI Express, 3.125 Gbps XAUI, etc.)\n• Special interfaces (P-CML,LVDS,PCI,HSTL,SSTL-2, etc.)\n• Embedded macro : PLL, SRAM\n• 8-channel clock supply system incorporating a PLL\n• Supports Memory-BIST/Boundary-SCAN\n• Package : FC-BGA (729 pins to 1681 pins)\n• ARM core is supported.

CA912

17 dB 40-860 MHz VHF/UHF CATV/MATV AMPLIFIER

TheRFLineVHF/UHFCATVamplifier ...designedforbroadbandapplicationsrequiringlow–distortionandhighoutputcapability.SpecificallyintendedforCATV/MATVmarketrequirements.Theseamplifiersfeatureion–implantedarsenicemittertransistorsandanallgoldmetalsystem. •Sp

CA91C142D

VME to PCI Bridge; • High performance 64-bit VME to PCI bus interconnect\n• Industry-proven, reliable PCI to VME bridge\n• Fully compliant, 32 or 64-bit, 33 MHz PCI bus interconnect\n• Integral FIFOs for write posting to maximize bandwidth utilization\n• Programmable DMA controller with Linked-List mode\n• Flexible interrupt logic\n• Automatic initialization for VME slave-only applications\n• Extensive suite of VMEbus address and data transfer modes\n• Register set programmable from both the PCI and VME64 buses\n• Full VMEbus system controller functionality\n• Sustained transfer rates of up to 60-70 Mbytes/s\n• Support for RMWs, ADOH, PCI LOCK cycles, and semaphores\n• Location monitors for broadcasting interrupts and message passing\n• Commercial, industrial, and extended temperature variants\n• IEEE 1149.1 JTAG \n;

The CA91C142D (Universe II) is the industry's leading high-performance PCI to VME interconnect. It is fully compliant with the VME64 bus standard, and is tailored to support advanced PCI processors and peripherals. With a zero wait state implementation for write transactions, and the capability to support pre-fetch reads and multi-beat transactions, the Universe II provides high performance utilization of the PCI bus.\n\nThe Universe II eases development of VMEbus systems by providing direct connection to a local PCI bus. The device is ideally suited for CPU or peripheral boards functioning as both master and slave in the VMEbus system. Bridging is accomplished through a decoupled architecture with independent FIFOs for inbound (VME to PCI), outbound (PCI to VME), and DMA traffic. With this architecture, throughput is maximized without sacrificing bandwidth on either bus.\n\nDesigning with the Universe II eases the development of VME Single Board Computers (SBCs) and I/O peripherals targeting the military, aerospace, industrial automation and medical markets.

CA91L750

Memory Controller; Processor (60x) Bus Interface (64-bit/100 MHz)\nSDRAM Interface – 64-bit data bus, 72-bit data bus with ECC\nFLASH/ROM Interface\nDual UARTs\nI2C Interface\nInterrupt Controller;

The PowerPro™ delivers memory control support for PowerPC® processors (MPC750, MPC740) and the IDT PowerPC-to-PCI bus switch, PowerSpan™. The PowerPro is designed to leverage the switched PCI architecture of PowerSpan II in PowerPC applications.

CA91C142D-25EE

Universe IID/IIBTM User Manual

CA91C142D-33CE

Universe IID/IIBTM User Manual

CA91C142D-33CEV

Universe IID/IIBTM User Manual

CA91C142D-33IE

Universe IID/IIBTM User Manual

CA91C142D-33IEV

Universe IID/IIBTM User Manual