通用无线

BK5811是工作在5.725 – 5.850 GHz ISM频段的FSK/GFSK收发器。集成的完整的数据处理和控制功能使得它可以和一个非常简单的MCU构成一个完整的无线通信系统。脉冲模式传输和2 Mbps空中速率使得其非常适合极低功耗应用。自动重发和自动应答机制无需MCU参与就可实现可靠的无线通信。 *. 工作在5.8 GHz ISM频段\r\n*. 可用FSK调制实现更好的灵敏度，也可使用GFSK调制获取更好的频谱效率\r\n*. 1 Mbps或 2 Mbps空中数据速率\r\n*. 输出功率0到-18 dBm可调\r\n*. 0 dBm输出功率下发射机功耗13.5 mA\r\n*. 2 Mbps空中数据速率下接收机功耗23 mA\r\n*. 支持 +/- 10ppm的 16 MHz晶体\r\n*. 正常0到32字节载荷时有三级FIFO，0到256字节超长载荷下一级FIFO\r\n*. 自动包处理\r\n*. 接收机同时支持6个发射设备以形成 1对6的星型网络\r\n*. 支持1.9 V;

BEKEN

博通集成

10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC

General Description The MAX5811 is a single, 10-bit voltage-output digital-to-analog converter (DAC) with an I2C™-compatible 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply and draws only 100µA at VDD = 3.6V. A low-power powerdown

文件：417.57 Kbytes 页数：13 Pages

MAXIM

美信

BiMOS II 12-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS

Designed primarily for use with vacuum-fluorescent displays, the UCN5811A smart power BiMOS II driver features low-output saturation voltages and high output switching speed. These devices contain CMOS shift registers, data latches, and control circuitry, and bipolar high-speed sourcing outputs wi

文件：156.01 Kbytes 页数：8 Pages

ALLEGRO

BiMOS II 12-BIT SERIAL-INPUT, LATCHED SOURCE DRIVERS

Designed primarily for use with vacuum-fluorescent displays, the UCN5811A smart power BiMOS II driver features low-output saturation voltages and high output switching speed. These devices contain CMOS shift registers, data latches, and control circuitry, and bipolar high-speed sourcing outputs wi

文件：156.01 Kbytes 页数：8 Pages

ALLEGRO