10G Active Mux (1x2) with Integrated Re-timer for USB 3.1

Features
Built-in re-timer - Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps - Loss compensation to recover up to 23dB channel loss
Integrated mux - Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector - Mux control input through I2C comma

文件：221.29 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Power Delivery PHY with Channel Configuration Control

Features
On-chip Microcontroller (OCM) to implement USBPD messaging and DisplayPort related functions
DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode to support exter

文件：174.62 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Power Delivery PHY with Channel Configuration Control

Features
On-chip Microcontroller (OCM) to implement cable detection and USB-PD messaging for charging related functions
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode to support external MCU/IC
VBUS control and USB_ID pins to control external switch, Powe

文件：174.46 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Type-C™ Crosspoint Switch

Features
High-speed switching up to 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and related functions
5V-tolerant CC/VCONN signals
Dead battery detection support
I2C slave mode

文件：188.08 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Type-C™ Crosspoint Switch

Features
High-speed switching up to 6.75Gbps
4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM mes

文件：177.07 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

10G USB 3.1 Re-timer (1-Port)

Features
Built-in re-timer - Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps - Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Reference clock for re-timer - Utilizes a 24MHz reference XTAL or 1.05V

文件：204.54 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

8.1G DisplayPort™ 4-lanes Re-timer

Features  Built-in re-timers - Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps - Supports both transparent mode and nontransparent mode (transparent or LTTPR) - Loss compensation to recover up to 27dB channel loss  Integrated AUX pass-through

文件：211.29 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

10G Active Mux (1x2) with Integrated Re-timer for U SB 3.1

Analogix

硅谷数模