USB Type-C™ Crosspoint Switch with On-chip Microcontroller

Features
4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging
Native

文件：210.45 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Type-C™ Power Delivery v3.0 Controller with De-Mux (USB/DP)

Features
High-speed de-mux (4x6) switching up to 10Gbps
4-lanes DisplayPort outputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, and 8.1Gbps
USB 3.1 signal output (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
USB 1.1 Billboard support
DisplayPort Alterna

文件：213.72 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB-C™ Port Controller

Features  USB-PD Support: UFP and DFP - Chunking and unchunking - TCPCI compliant - Fast role swap (FRS) - Integrated VCONN switch - VBUS sense with 36V over current and over voltage protection  USB Billboard class (low speed) - Embedded RISC-V core and secure FW update - 96KB instructi

文件：342.68 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB-C™ Port Controller

Features
TCPC-compliant hardware interface
Supports DFP and DRP modes for Host-only or Dual-Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current
AUX CH/SBU Mux
Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto d

文件：206.29 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB-C™ Port Controller

Features
TCPC-compliant hardware interface
Supports DFP and DRP modes for Host-only or Dual- Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current
Integrated Billboard
Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS

文件：190.97 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Type-C™ Crosspoint Switch with On-chip Microcontroller

Features
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
Native TCPC-compliant hardware register interface
Supports DFP and DRP modes for Host-only or Dual- Role applications
Integrated VCONN FETs
Built-in 10-bit ADC to monitor VBUS voltage and current

文件：204.21 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

USB Type-C™ Crosspoint Switch with On-chip Microcontroller

ANX7447 is an intelligent crosspoint switch that supports switching at data rates of up to 10Gbps. ANX7447 supports high- speed interfaces, such as USB 3.1 (Gen 1 — 5Gbps, Gen 2 — 10Gbps) and DisplayPort’” (DP) 1.4 at up to HBR3 (8.1Gbps). ANX7447 is designed as a companion IC to various CPUs and Ap ·4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps\n·USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed \n·DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging\n·Native TCPC-compliant;

Analogix

硅谷数模