10G USB 3.1 Re-timer (1-Port)

Features
Built-in re-timer - Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps - Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Reference clock for re-timer - Utilizes a 24MHz reference XTAL or 1.05V

文件：204.54 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

10G Active Mux (1x2) with Integrated Re-timer for USB 3.1

Features
Built-in re-timer - Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps - Loss compensation to recover up to 23dB channel loss
Integrated mux - Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector - Mux control input through I2C comma

文件：221.29 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

8.1G DisplayPort™ 4-lanes Re-timer

Features  Built-in re-timers - Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps - Supports both transparent mode and nontransparent mode (transparent or LTTPR) - Loss compensation to recover up to 27dB channel loss  Integrated AUX pass-through

文件：211.29 Kbytes 页数：2 Pages

ANALOGIX

硅谷数模

SlimPort® (4K Ultra-HD) Receiver

Features * Standard compliance - DisplayPort1.4, HDCP2.2/1.4 - MIPI-DSI 1.2 and D-PHY 1.1 * DisplayPort Receiver - DisplayPort1﹒4 receiver - Configurable 1, 2 or 4-lane input supports: HBR3 (8.1Gbps), 1882 (5.4Gbps), HBR (2.7Gbps) and RBR (1.62Gbps) - Horizontal left / right line splitting

文件：861.89 Kbytes 页数：3 Pages

ANALOGIX

硅谷数模

10G USB 3.1 Re-timer (1-Port)

ANX7490 is a USB 3.1 1-port re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7490 can compensate signal loss of up to -23dB and is compliant to the latest USB 3.1 specifications. ANX7490 is protocol aware for better link power management and power savi Other key features\n·Built-in re-timers·Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps\n·Loss compensation to recover up to 23dB channel loss\n\n·Protocol awareness for better link power management (LPM) and savings\n·Reference clock for re-timers·Utilizes a 24MHz reference XTAL or 1.05;

Analogix

硅谷数模