2ED2106S06F中文资料英飞凌数据手册PDF规格书

Description

The 2ED21091S06F is a high voltage, high speed power MOSFET and IGBT driver with dependent high and low side referenced output channels. Based on Infineon’s SOI-technology there is an excellent ruggedness and noise immunity with capability to maintain operational logic at negative voltages of up to - 11 V on VS pin (VCC = 15 V) on transient voltages. There are not any parasitic thyristor structures present in the device, hence no parasitic latch up may occur at all temperature and voltage conditions. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET, SiC MOSFET or IGBT in the high side configuration, which operate up to 650 V.

Features

• Unique Infineon Thin-Film-Silicon On Insulator (SOI)-technology

• Negative VS transient immunity of 100 V

• Floating channel designed for bootstrap operation

• Operating voltages (VS node) upto + 650 V

• Maximum bootstrap voltage (VB node) of + 675 V

• Integrated ultra-fast, low resistance bootstrap diode

• Logic operational up to –11 V on VS Pin

• Negative voltage tolerance on inputs of –5 V

• Independent under voltage lockout for both channels

• Schmitt trigger inputs with hysteresis

• 3.3 V, 5 V and 15 V input logic compatible

• Maximum supply voltage of 25 V

• Internal 540 ns dead time and programmable up to 2.7 us with

   external resistor

• The dual function DT/SD input turns off both channels

• RoHS compliant