ZSSC1750中文资料Data Acquisition System Basis Chip数据手册Renesas规格书

描述 Description

The ZSSC1750 is a System Basis Chip (SBC) with a dual-channel ADC for battery sensing/management in automotive, industrial, and medical systems. The ZSSC1750 features an SPI interface. One of the two input channels measures the battery current IBAT via the voltage drop at the external shunt resistor. The second channel measures the battery voltage VBAT and the temperature. By simultaneously measuring VBAT and IBAT, it is possible to determine dynamically the internal resistance of the battery, Rdi, which is correlated with the state-of-health (SOH) of the battery. By integrating IBAT, it is possible to determine the state-of-charge (SOC) and the state-of-function (SOF) of the battery. During Sleep Mode, the system makes periodic measurements to monitor the discharge of the battery. Measurement cycles are controlled by user software and include various wake-up conditions. The ZSSC1750 is optimized for ultra-low power consumption drawing only 60μA or less in this mode.

特性 Features

Two high-precision 24-bit sigma-delta ADCs (18-bit with no missing codes)
Sample rate: 1Hz to 16kHz
On-chip voltage reference (5ppm/K typical)
Current channel IBAT offset error: ≤ 10mA
Current channel IBAT resolution: ≤ 1mA
Current channel programmable gain: 4 to 512
Current channel maximum differential input stage input range: ±300mV
Voltage channel input range: 4 to 28.8V
Voltage channel accuracy: ±60ppm full-scale range = 1.73mV
Temperature channel external temperature sensor (NTC)
Temperature channel factory-calibrated internal temp. sensor: ±2°C
LIN 2.1/SAE J2602-1 transceiver
Normal Mode typical current consumption: 12mA
Sleep Mode typical current consumption: ≤ 60μA