ZSPM4551数据手册集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF

描述 Description

The ZSPM4551 is a DC/DC synchronous switching lithium-ion (Li-Ion) battery charger with fully integrated power switches, internal compensation, and full fault protection. Its switching frequency of 1MHz enables the use of small filter components, resulting in smaller board space and reduced BOM cost. In Full-Charge Constant-Current Mode, the regulation is for constant current (CC). Once termination voltage is reached, the regulator operates in voltage mode. When the regulator is disabled (the EN pin is low), the device draws 10µA (typical) quiescent current. The ZSPM4551 includes supervisory reporting through the NFLT (inverted fault) open-drain output to interface other components in the system. Device programming is achieved by an I²C interface through the SCL and SDA pins.

特性 Features

VBAT reverse-current blocking
Programmable temperature-compensated termination voltage: 3.94V to 4.18V ±1%
User programmable maximum charge current: 50mA to 1500mA
Current mode PWM control in constant voltage
Supervisor for VBAT reported at the NFLT pin
Input supply under-voltage lockout
Full protection for over-current, over-temperature, VBAT over-voltage, and charging timeout
Charge status indication
I2C program interface with EEPROM registers