ZSPM4523中文资料High-Efficiency Solar PV MPPT Regulator for Super Capacitor Systems数据手册Renesas规格书

描述 Description

The ZSPM4523 is a DC/DC synchronous switching super capacitor charger with fully integrated power switches, internal compensation, and full fault protection. It uses a temperature-independent photovoltaic maximum power point tracking (MPPT) calculator to optimize power output from the source during Full-Charge Mode. Its 1MHz switching frequency allows using small filter components, which results in smaller board space and reduced bill-of-material costs. In Full-Charge Mode, the duty cycle is controlled by the MPPT function. Once the termination voltage is reached, the regulator operates in Constant Voltage Mode. When the regulator is disabled (the EN pin is low), the device draws 10µA (typical) quiescent current from VOUT. The ZSPM4523 integrates a wide range of protection circuitry, including input supply under-voltage lockout, output over-voltage protection, current limiting, and thermal shutdown. The ZSPM4523 includes supervisory reporting via the NFLT (Inverted Fault) open-drain output to interface other components in the system. Device programming is achieved by the I²C interface through the SCL and SDA pins.

特性 Features

Temperature-independent MPPT regulation
VOUT reverse-current blocking
Programmable temperature-compensated termination voltage: 2.48 to 2.74 V ± 1%
User programmable maximum charge current: 50mA to 1500mA
Input supply under-voltage lockout
Full protection for VOUT over-voltage
I2C program interface with EEPROM registers
Charge status indication