XRT83VSH38中文资料8-Channel T1/E1/J1 Short-Haul Line Interface Unit数据手册MaxLinear规格书

描述 Description

The XRT83VSH38 is a fully integrated 8-channel short-haul line interface unit (LIU) that operates from a 1.8V and a 3.3V power supply. Using internal termination, the LIU provides one bill of materials to operate in T1, E1, or J1 mode with minimum external components. The LIU features are programmed through a standard parallel or serial microprocessor interface. EXAR's LIU has patented high impedance circuits that allow the transmitter outputs and receiver inputs to be high impedance when experiencing a power failure or when the LIU is powered off. Key design features within the LIU optimize 1:1 or 1+1 redundancy and non-intrusive monitoring applications to ensure reliability without using relays.
The on-chip clock synthesizer generates T1/E1/J1 clock rates from a selectable external clock frequency and outputs a clock reference of the line rate chosen.
Additional features include RLOS, a 16-bit LCV counter for each channel, AIS, QRSS generation/detection, TAOS, DMO, and diagnostic loopback modes.

特性 Features

·Fully integrated eight channel short-haul transceivers for T1/J1 (1.544MHz) and E1 (2.048MHz) applications·T1/E1/J1 short haul and clock rate are per port selectable through software without changing components·Internal Impedance matching on both receive and transmit for 75Ω (E1), 100Ω (T1), 110Ω (J1), and 120Ω (E1) applications are per port selectable through software without changing components·Power down on a per channel basis with independent receive and transmit selection·Five pre-programmed transmit pulse settings for T1 short haul applications per channel·User programable Arbitrary Pulse mode·On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel basis·Selectable Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit path·Driver failure monitor output (DMO) alerts of possible system or external component problems·Transmit outputs and receive inputs may be \"High\" impedance for protection or redundancy applications on a per channel basis·Support for automatic protection switching·1:1 and 1+1 protection without relays·Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss for both T1 and E1·Loss of signal (RLOS) according to ITU-T G.775/ETS300233 (E1) and ANSI T1.403 (T1/J1)·Programmable data stream muting upon RLOS detection·On-Chip HDB3/B8ZS encoder/decoder with an internal 16-bit LCV counter for each channel·On-Chip digital clock recovery circuit for high input jitter tolerance·QRSS/PRBS pattern generator and detection for testing and monitoring·Error and bipolar violation insertion and detection·Transmit all ones (TAOS) Generators and Detectors·Supports local analog, remote, digital, and dual loopback modes·Supports gapped clocks for mapper/multiplexer applications·1.8V Digital Inner Core·3.3V I/O Supply and Analog Inner Core·225 ball BGA package·-40°C to +85°C Temperature Range·Pb-Free, RoHS Compliant Versions Offered

应用 Application

·T1 Digital Cross-Connects (DSX-1)·ISDN Primary Rate Interface·CSU/DSU E1/T1/J1 Interface·T1/E1/J1 LAN/WAN Routers·Public switching Systems and PBX Interfaces·T1/E1/J1 Multiplexer and Channel Banks