XRT83VSH28中文资料8-Channel E1 Short-Haul Line Interface Unit with JA & CDR数据手册MaxLinear规格书

描述 Description

The XRT83VSH28 is a fully integrated 8-channel short-haul line interface unit (LIU) that operates from a 1.8V and a 3.3V power supply. Using internal termination, the LIU provides one bill of materials to operate in E1 75? or 120? mode with minimum external components. The LIU features are programmed through a standard parallel or serial microprocessor interface. EXAR's LIU has patented high impedance circuits that allow the transmitter outputs and receiver inputs to be high impedance when experiencing a power failure or when the LIU is powered off. Key design features within the LIU optimize 1:1 or 1+1 redundancy and non-intrusive monitoring applications to ensure reliability without using relays.
The on-chip clock synthesizer generates an E1 clock reference.
Additional features include RLOS, a 16-bit LCV counter for each channel, AIS, QRSS generation/detection, TAOS, DMO, and diagnostic loopback modes.

特性 Features

·Fully integrated eight channel short-haul transceivers for E1 (2.048MHz) applications
·Internal Impedance matching on both receive and transmit for 75Ω (E1) and 120Ω (E1) applications are per port selectable through software without changing components
·Power down on a per channel basis with independent receive and transmit selection
·User programable Arbitrary Pulse mode
·On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel basis
·Selectable Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit path
·Driver failure monitor output (DMO) alerts of possible system or external component problems
·Transmit outputs and receive inputs may be \"High\" impedance for protection or redundancy applications on a per channel basis
·Support for automatic protection switching
·1:1 and 1+1 protection without relays
·Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss
·Loss of signal (RLOS) according to ITU-T G.775/ETS300233 (E1)
·Programmable data stream muting upon RLOS detection
·On-Chip HDB3 encoder/decoder with an internal 16-bit LCV counter for each channel
·On-Chip digital clock recovery circuit for high input jitter tolerance
·QRSS/PRBS pattern generator and detection for testing and monitoring
·Error and bipolar violation insertion and detection
·Transmit all ones (TAOS) Generators and Detectors
·Supports local analog, remote, digital, and dual loopback modes
·Supports gapped clocks for mapper/multiplexer applications
·1.8V Inner Core
·3.3V I/O Supply Operation
·225 ball BGA package
·-40°C to +85°C Temperature Range
·Pb-Free, RoHS Compliant Versions Offered

应用 Application

·ISDN Primary Rate Interface
·CSU/DSU E1 Interface
·E1 LAN/WAN Routers
·Public switching Systems and PBX Interfaces
·E1 Multiplexer and Channel Banks