XRT83VSH314数据手册集成电路（IC）的电信规格书PDF

描述 Description

The XRT83VSH314 is a fully integrated 14-channel short-haul line interface unit (LIU) that operates from a 1.8V Inner Core and 3.3V I/O power supplies. Using internal termination, the LIU provides one bill of materials to operate in T1, E1, or J1 mode independently on a per channel basis with minimum external components. The LIU features are programmed through a standard microprocessor interface. EXAR's LIU has patented high impedance circuits that allow the transmitter outputs and receiver inputs to be high impedance when experiencing a power failure or when the LIU is powered off. Key design features within the LIU optimize 1:1 or 1+1 redundancy and non-intrusive monitoring applications to ensure reliability without using relays.
The on-chip clock synthesizer generates T1/E1/J1 clock rates from a selectable external clock frequency and has five output clock references that can be used for external timing (8kHz, 1.544Mhz, 2.048Mhz, nxT1/J1, nxE1).
Additional features include RLOS, a 16-bit LCV counter for each channel, AIS, QRSS/PRBS generation/detection, TAOS, DMO, and diagnostic loopback modes.

特性 Features

·Fully integrated 14-Channel short haul transceivers for T1/J1 (1.544MHz) and E1 (2.048MHz) applications·T1/E1/J1 short haul and clock rate are per port selectable through software without changing components·Internal Impedance matching on both receive and transmit for 75Ω (E1), 100Ω (T1), 110Ω (J1), and 120Ω (E1) applications are per port selectable through software without changing components·Power down on a per channel basis with independent receive and transmit selection·Five pre-programmed transmit pulse settings for T1 short haul applications per channel·User programable Arbitrary Pulse mode·On-Chip transmit short-circuit protection and limiting protects line drivers from damage on a per channel basis·Selectable Crystal-Less digital jitter attenuators (JA) with 32-Bit or 64-Bit FIFO for the receive or transmit path·Driver failure monitor output (DMO) alerts of possible system or external component problems·Transmit outputs and receive inputs may be \"High\" impedance for protection or redundancy applications on a per channel basis·Support for automatic protection switching·1:1 and 1+1 protection without relays·Receive monitor mode handles 0 to 6dB resistive attenuation (flat loss) along with 0 to 6dB cable loss for both T1 and E1·Loss of signal (RLOS) according to ITU-T G.775/ETS300233 (E1) and ANSI T1.403 (T1/J1)·Programmable data stream muting upon RLOS detection·On-Chip HDB3/B8ZS encoder/decoder with an internal 16-bit LCV counter for each channel·On-Chip digital clock recovery circuit for high input jitter tolerance·QRSS/PRBS pattern generator and detection for testing and monitoring·Error and bipolar violation insertion and detection·Transmit all ones (TAOS) Generators and Detectors·Supports local analog, remote, digital, and dual loopback modes·1.8V Digital Core·3.3V I/O and Analog Core·304-Pin BGA package·-40°C to +85°C Temperature Range·Supports gapped clocks for mapper/multiplexer applications

应用 Application

·T1 Digital Cross Connects (DSX-1)·ISDN Primary Rate Interface·CSU/DSU E1/T1/J1 Interface·T1/E1/J1 LAN/WAN Routers·Public Switching Systems and PBX Interfaces·T1/E1/J1 Multiplexer and Channel Banks·Integrated Multi-Service Access Platforms (IMAPs)·Integrated Access Devices (IADs)·Inverse Multiplexing for ATM (IMA)·Wireless Base Stations·Pb-Free, RoHS Compliant Versions Offered