WT6615F中文资料USB Power and Charging Port Controllers数据手册Weltrend规格书

描述 Description

The WT6615F is a highly integrated USB Power Delivery (PD) controller that supports USB PD 3.0 Programmable Power Supply (PPS) specification and QualcommR Quick ChargeTM 4 or Quick Charge 4+ technologies designed for USB Type-C Downstream Facing Port (Source) charging applications such as power adapters, wall chargers, car chargers, power strip, power banks, and etc.
The WT6615F minimizes external components by integrating USB PD baseband PHY, Type-C detection, shunt regulator, voltage and current monitors, and control circuits of blocking MOSFET, and an 8-bit MCU to allow small form factor and low BOM cost. It supports wide operation voltage range from 3V to 30V without the need of an external LDO. A Multi-Time-Programmable (MTP) ROM is provided for program code and user configuration data.
The WT6615F is verified by GRL for Qualcomm Quick Charge 4. Read the cover page of GRL Compliance Test Report for WT6615F.
The WT6615F is also verified by UL for Qualcomm Quick Charge 3.0 for the Quick Charge 4+ program if desired. Read the UL Verification Certificate for WT6615F.

特性 Features

●USB Type-C Downstream Facing Port (Source)
●USB Power Delivery Rev. 3.0, Ver. 1.1 baseband communication
●Built-in shunt regulator and support 3V to 20V VBUS output
 - Provide fine tune to increase voltage slightly
 - Constant Voltage
 - Constant Current
●Programmable Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Current Protection (OCP) and Over Temperature Protection (OTP)
●Low side voltage output current shunt monitor
●Battery Charging specification, Rev. 1.2 (BC1.2) Dedicated Charging Port (DCP), Quick Charge 4, and Quick Charge 4+
●Supports Fast Charge Protocol and Smart Charge Protocol
●Supports MIPIR Battery Interface V1.1 (BIF)
●10-bit ADC for voltage and current monitoring
●8-bit MCU
 - Implements Power Delivery message protocol and device policy
 - VBUS output control
 - Power supply protection
●Multi-Time-Programmable (MTP) ROM
●External blocking MOSFET control
●Built-in discharge MOS
●Internal RC oscillator
●Internal VDD regulator
●General purpose I/Os
●Serial interface: UART
●Supports power saving mode
●Operating voltage range: 3V ~ 30V
●Operating temperature range: -20°C ~ +105°C
●Package: 16-Pin QFN, 14-Pin SOP