WT6573F数据手册Weltrend中文资料规格书

描述 Description

WT6573F is a USB full speed / low speed device controller with Turbo 8052 CPU, 16K-byte Flash ROM, 512-byte SRAM, 19-channel 12-bit ADC, 2-channel 8-bit PWM, standard RS232 interface, SPI master/slave interface, low voltage reset, In-System-Programming (ISP) function by USB or I2C interface, and on-chip ICE.WT6573F is suitable for the USB peripheral applications, such as: PS3 game pad/joystick, USB game controller, USB MIDI keyboard, USB touch-pad, or any USB devices with ADC applications.When USB-related circuit and V33 regulator are disabled, WT6573F could be used for portable applications which are powered by battery (VBAT <= 3.6V).

特性 Features

●8-bit Turbo 8052 compatible CPU with 24MHz operating frequency
●12MHz or 24MHz crystal oscillator (selectable by S/W)
●32kHz RC Ring Clock for off line and low power mode
●16K bytes Flash ROM including EEPROM emulation
●512 bytes SRAM
●USB features:
 - Complete compatible with Universal Serial Bus specification 2.0 Full / Low Speed
 - 1 control endpoint, IN/OUT each with 64 Bytes (8/16/32/64-byte programmable) FIFO
 - 3 Generic endpoints (IN/OUT INT/Bulk programmable) each with 64-Byte (8/16/32/64 bytes programmable) FIFO; Endpoint 3 can also be configured as OUT token for endpoint 1 or 2
 - Supports USB Suspend, Resume and Remote Wakeup
●19-channel 12-bit ADC with external reference voltage input
●2-ch 8-bit PWM output
●Idle and power down modes supported
●Standard RS232 data transmission: up to 230400bps
●1 SPI interface
 - Master/Slave mode selectable
 - Max speed: 2MHz
 - Data length per transaction: 1-byte
●45(max.) GPIO pins for chip form and LQFP64; 37(max.) GPIO pins for LQFP48; 33(max.) GPIO pins for LQFP44
●USB-related circuit and V33 voltage regulator can be disabled for portable applications which are powered by battery (VBAT <= 3.6V)
●16 high sink current IO for LED control: Port A and Port E
●IO falling edge detect interrupt, can work as wakeup trigger at the power down mode: Port A
●Three 16-bit timer/counter
●Watch-dog timer (10ms ~ 640ms programmable)
●ISP function by 6-pin I2C (VDD5V, VSS, OSCI, RESETN, SCL, SDA pins) or USB interface
●On-chip ICE
●Operating voltage: 2.4V~5.25V
●Package: LQFP48/64