1.0625 Gbits/sec Fibre Channel Transceiver

General Description The VSC7125 is a full-speed Fibre Channel Transceiver optimized for Disk Drive and other space constrained applications. It accepts 10-bit 8B/10B encoded transmit data, latches it on the rising edge of REFCLK and serializes it onto the TX PECL differential outputs at a baud

文件：123.46 Kbytes 页数：16 Pages

VITESSE

1.0625 Gbits/sec Fibre Channel Transceiver

General Description The VSC7126 is a full-speed Fibre Channel Transceiver optimized for Host Adapter and other space- constrained applications. It accepts two 10-bit 8B/10B encoded transmit characters, latches them on the rising edge of TBC and serializes the data onto the TX+/- PECL differential

文件：223.21 Kbytes 页数：16 Pages

VITESSE

1.0625 Gbits/sec Fibre Channel Transceiver

General Description The VSC7126 is a full-speed Fibre Channel Transceiver optimized for Host Adapter and other space- constrained applications. It accepts two 10-bit 8B/10B encoded transmit characters, latches them on the rising edge of TBC and serializes the data onto the TX+/- PECL differential

文件：223.21 Kbytes 页数：16 Pages

VITESSE

Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel

General Description The VSC7127 and VSC7129 contain six cascaded Port Bypass Circuits (PBCs), the FibreTimer™ configurable Repeater/Retimer (CRU) and a Signal Detect Unit (SDU). These parts are typically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as ill

文件：174.77 Kbytes 页数：12 Pages

VITESSE

Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel

General Description The VSC7127 and VSC7129 contain six cascaded Port Bypass Circuits (PBCs), the FibreTimer™ configurable Repeater/Retimer (CRU) and a Signal Detect Unit (SDU). These parts are typically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as ill

文件：174.77 Kbytes 页数：12 Pages

VITESSE

Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel

General Description The VSC7127 and VSC7129 contain six cascaded Port Bypass Circuits (PBCs), the FibreTimer™ configurable Repeater/Retimer (CRU) and a Signal Detect Unit (SDU). These parts are typically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as ill

文件：174.77 Kbytes 页数：12 Pages

VITESSE

Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel

General Description The VSC7127 and VSC7129 contain six cascaded Port Bypass Circuits (PBCs), the FibreTimer™ configurable Repeater/Retimer (CRU) and a Signal Detect Unit (SDU). These parts are typically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as ill

文件：174.77 Kbytes 页数：12 Pages

VITESSE

Hex Port Bypass Circuit / Dual Repeater for 1.0625 Gb/s FC-AL Disk Arrays

General Description The VSC7128 contains six Port Bypass Circuits (PBCs), dual embedded Clock Recovery Unit repeaters (CRU) and dual Signal Detect Units (SDU). These functions are integrated into a single part to minimize circuit size, part count, cost, high frequency routing and jitter accumulat

文件：92.74 Kbytes 页数：10 Pages

VITESSE

Hex Port Bypass Circuit / Dual Repeater for 1.0625 Gb/s FC-AL Disk Arrays

General Description The VSC7128 contains six Port Bypass Circuits (PBCs), dual embedded Clock Recovery Unit repeaters (CRU) and dual Signal Detect Units (SDU). These functions are integrated into a single part to minimize circuit size, part count, cost, high frequency routing and jitter accumulat

文件：92.74 Kbytes 页数：10 Pages

VITESSE

Family of Repeater/Retimer and Port Bypass Circuits for Fibre Channel

General Description The VSC7127 and VSC7129 contain six cascaded Port Bypass Circuits (PBCs), the FibreTimer™ configurable Repeater/Retimer (CRU) and a Signal Detect Unit (SDU). These parts are typically used in distributing Fibre Channel signals to an array of disk drives in an FC-AL loop as ill

文件：174.77 Kbytes 页数：12 Pages

VITESSE