VND5E004C30数据手册ST中文资料规格书

描述 Description

The device is a double channel high-side driver manufactured using ST proprietary VIPower® M0-5 technology and housed in a MultiPowerSO-30 package. The device is designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. It also implements a 3 V and 5 V CMOS-compatible interface for use with any microcontroller.
The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, overtemperature indication, short-circuit to VCC diagnosis and on-state and off-state open-load detection. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the DE pin low to share the external sense resistor with similar devices.

特性 Features

AEC-Q100 qualified
GeneralVery low standby current
3.0 V CMOS compatible inputs
Optimized electromagnetic emissions
Very low electromagnetic susceptibility
Compliant with European directive 2002/95/EC
Very low current sense leakage

Diagnostic functionsProportional load current sense
High current sense precision for wide currents range
Diagnostic enable pin
Off-state open-load detection
Output short to V
CC detection
Overload and short to ground (power limitation) indication
Thermal shutdown indication

ProtectionUndervoltage shutdown
Overvoltage clamp
Load current limitation
Self limiting of fast thermal transients
Protection against loss of ground and loss of V
CC
Overtemperature shutdown with auto restart (thermal shutdown)
Inrush current active management by power limitation
Reverse battery protection with self switch-on of the Power MOSFET
Electrostatic discharge protection