VND5004DSP30数据手册ST中文资料规格书

描述 Description

The device is a double channel high-side driver manufactured using STMicroelectronics proprietary VIPower® M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground.
Active VCC pin voltage clamp and load dump protection circuit protect the device against transients on the VCC pin. The device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is high impedance.
Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown with automatic restart allows the device to recover normal operation as soon as a fault condition disappears.

特性 Features

AEC-Q100 qualified
GeneralInrush current active management by power limitation
Very low standby current
3.0 V CMOS compatible input
Optimized electromagnetic emission
Very low electromagnetic susceptibility
In compliance with the 2002/95/EC European directive

Diagnostic functionsProportional load current sense
Current sense disable
Thermal shutdown indication

ProtectionUndervoltage shutdown
Overvoltage clamp
Load current limitation
Thermal shutdown
Self limiting of fast thermal transients
Protection against loss of ground and loss of VCC
Reverse battery protection with self switch-on of the Power MOSFET
Electrostatic discharge protection application

All types of resistive, inductive and capacitive loads
Suitable for power management applications