VND5004CSP30

Double 4mOhm high side driver with analog current sense for automotive applications; AEC-Q100 qualified\nGeneralInrush current active management by power limitation\nVery low stand-by current\n3.0 V CMOS compatible input\nOptimized electromagnetic emission\nVery low electromagnetic susceptibility\nIn compliance with the 2002/95/EC European directive\n\nDiagnostic functionsProportional load current sense\nCurrent sense disable\nThermal shutdown indication\n\nProtectionUndervoltage shutdown\nOvervoltage clamp\nLoad current limitation\nThermal shutdown\nSelf limiting of fast thermal transients\nProtection against loss of ground and loss of VCC\nReverse battery protection with self switch-on of the PowerMOS\nElectrostatic discharge protection\n\n;

The device is a double channel high-side driver manufactured using STMicroelectronics proprietary VIPower® M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp and load dump protection circuit protect the devices against transients on the VCC pin.\nThe device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open. When CS_DIS is driven high, the CURRENT SENSE pin is high impedance.\nOutput current limitation protects the devices in overload condition. In case of long duration overload, the device limits the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown with automatic restart allows the device to recover normal operation as soon as a fault condition disappears.\n

VND5004CSP30

Double 4m high-side driver with analog CurrentSense