USB5826C中文资料6-Port USB SS / Hi-Speed Hub Controller数据手册Microchip规格书

描述 Description

Microchip’s USB5826 SmartHub™ is a 6 port, SuperSpeed (SS), low power, configurable USB3.2 Gen1 hub and fully compliant with USB-IF's USB 3.2 Gen1 specification. The USB5826 also supports Hi-Speed (HS), Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.This \"C\" version contains the latest silicon. All new USB5826 designs should move to this newer \"C\" version.Microchip SmartHub's are defined as USB hubs that integrates system levels functions typically associated with a separate MCU or processor. The USB5826 SmartHub enables communication to other peripherals in addition to USB. The USB5826's I/O Bridging capability allows the host to seamlessly interface to peripherals via I²C, SPI or GPIOs over USB. The USB5826 also enable a downstream device to take control of the host system by swapping roles and becoming the host port. USB5816 based systems can also switch between two different hosts if required. This role changing technology is called FlexConnect and can be initiated through hardware or software commands.New technologies like the USB Type-C connector and power delivery are changing the USB landscape. Designed to simplify the latest USB hub designs, the USB5826 has built in Billboard support giving you the option to offload this function from the power delivery controller onto the hub. In addition, the hub can expand beyond six ports through PortSplitting which allows for embedded applications to only use the interface needed for internal USB connections.MPLAB® Connect Configurator, Microchip’s proprietary software utility, can be used to program on-chip, One Time Programmable (OTP) ROM for the USB5826 which stores required register settings to ensure the desired start up configuration at power on. All LED, GPIOs and port control signal pins are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5826 can be configured through a series of external low-cost resistor bootstraps. A handful of bootstrap pins are available on the USB5826 to enable standard configurations for GPIOs and downstream ports. No OTP programming required.Microchip's complimentary and confidential MicroCHECK design review service, which offers insight from the initial concept to the final PCB layout, is available to customers who are using our products in their projects. You can confidently submit your design materials in a secure and private setting, and our expert engineers will provide individualized feedback to enhance your design. MicroCHECK design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

特性 Features

• Six downstream USB3.2 Gen1/2.0 ports w/ support for two USB Type-Cs

简介

USB5826C属于集成电路（IC）的控制器。由制造生产的USB5826C控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。