USB5742数据手册集成电路（IC）的控制器规格书PDF

描述 Description

Microchip’s USB5742 SmartHub™ IC is a 2 port, SuperSpeed (SS)/Hi-Speed (HS), low power, low pin count configurable and fully compliant with the USB 3.1 Gen 1 specification. The USB5742 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.The USB5742 is in a 0.4mm pitch, 56 pin QFN.  It's the smallest 2 port USB 3.1 Gen 1 hub in the industry.  Functionality was reduced to optimize pin count and provide a cost effective solution. SmartHub ICs are defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor. Microchip’s USB5742 Smart Hub support custom configurations of external ports and GPIO pins. MPLAB Connect Configurator, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM which stores required register settings to ensure the desired start up configuration at power on. All port control signal pins and GPIOs are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5742 can be configured through a series of external low-cost resistor bootstraps.  No OTP programming required.

Download a free copy of MPLAB Connect Configurator™ NOW

*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

特性 Features

Highlights
• Two downstream USB3.1 Gen1/2.0 ports
• 56pin (7 x 7 mm) 0.4mm ptich, SQFN lead-free, RoHS compliant package
• Simultaneous data transfer for 2500 mA of High Speed charging
• Enables charging from a mobile platform that is powered-off
• Integrated Hub Feature Controller (HFC) enabling port and GPIO configuration through OTP
• Port Config Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
• MPLAB Connect Configurator™: Tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM
• Manufacturing line programming tool and field update capabilities
• USB Link Power Management (LPM) support
• IETF RFC 4122 compliant 128-bit UUID
• Compatible with Microsoft® Windows® 8/8.1 and other major OS’s
• Industrial grade temperature support (-40°C to +85°C)
Target Applications
• Expansion Hubs
• Docking Stations
• LCD Monitors
• HDTVs

简介

USB5742属于集成电路（IC）的控制器。由制造生产的USB5742控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。