USB5816中文资料USB Hubs Products数据手册Microchip规格书

描述 Description

Microchip’s USB5816 SmartHub is a 6 port, SuperSpeed (SS)/Hi-Speed (HS), low power, configurable and fully compliant with the USB 3.1 Gen1 specification. The USB5816 also supports Full Speed (FS) and Low Speed (LS) USB signaling, offering complete coverage of all defined USB operating speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.A SmartHub is defined as a USB hub that integrates system levels functions typically associated with a separate MCU or processor.  The USB5816 SmartHub enables communication to other peripherals in addition to USB. This I/O Bridging capability allows the host to seamlessly interface to peripherals via I2C, SPI or GPIOs over USB.  The USB5816 also enable a downstream device to take control of the host system by swapping roles and becoming the host port. The USB5816 can also switch between two different hosts if required. This role changing technology is called FlexConnect and can be initiated through hardware or software commands.
New technologies like the USB Type-C connector and power delivery are changing the USB landscape. Designed to simplify the latest USB hub designs, the USB5816 enables a direct USB Type-C connection on one downstream port through an integrated 2:1 multiplexer which support the reversible connection feature of the USB Type-C connector.  The USB5816 also has built in Billboard support giving you the option to offload this function from the power delivery controller onto the hub. In addition, the hub can expand beyond six ports through PortSplitting which allows for embedded applications to only use the interface needed for internal USB connections.
ProTouch2, Microchip’s proprietary software utility, can be used to program On-chip One Time Programmable (OTP) ROM for the USB5816 which stores required register settings to ensure the desired start up configuration at power on. All LED, GPIOs and port control signal pins are under firmware control, allowing for maximum operational flexibility. However, for even more simplicity, the USB5816 can be configured through a series of external low-cost resistor bootstraps. A handful of bootstap pins are available on the USB5816 to enable standard configurations for GPIOs and downstream ports. No OTP programming required..
*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

特性 Features

Highlights·Six downstream USB3.1 Gen1/2.0 ports w/ support for a single USB Type-C downstream port
·Integrated Hub Feature Controller (HFC) enabling I/O Bridging and FlexConnect
·I/O Bridging: Host communication to external peripherals·USB to I2C/SPI/GPIO bridge endpoint support

·FlexConnect: Host port Swapping and Switching to downstream Devices·Reversible upstream and downstream Port 1 roles on command

·Integrated Billboard class device for Power Delivery notification support
·PortSplitting - USB downstream port can be split for custom applications using embedded USB3 devices in parallel with USB2.0 devices.
·Battery Charging - USB-IF rev1.2 support on downstream ports (DCP, CDP, SDP) including legacy Apple® iOS, Blackberry®, China Charging and many others
·Port Config Straps - Predefined configuration of port settings – Battery Charging, Non-Removable, Disable
·USB Link Power Management (LPM) support
·IETF RFC 4122 compliant 128-bit UUID
·Compatible with MSFT Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers
·Available in 100-pin (12mm x 12mm) VQFN RoHS compliant package
·Industrial grade temperature support (−40°C to +85°C)
·Automotive quality and PPAP support
 Target Applications·Expansion Hubs
·Docking Stations
·LCD Monitors
·HDTVs

简介

USB5816属于集成电路（IC）的控制器。由制造生产的USB5816控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。