Hi-Speed USB Host, Device or OTG PHY

General Description The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band

文件：1.05279 Mbytes 页数：53 Pages

Microchip

微芯科技

HI SPEED USB HOST OR DEVICE PHY WITH ULPI LOW PIN INTERFACE

General Description The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band

文件：344.65 Kbytes 页数：11 Pages

SMSC

SMSC Corporation

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

文件：719.61 Kbytes 页数：49 Pages

SMSC

SMSC Corporation

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

文件：960.64 Kbytes 页数：55 Pages

SMSC

SMSC Corporation

USB Bridges Products

The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band signaling and status b Features\n• USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0\n• Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode\n• Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface\n• 54.7;

Microchip

微芯科技

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

General Description The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band

文件：676.66 Kbytes 页数：59 Pages

Microchip

微芯科技

HI SPEED USB HOST OR DEVICE PHY WITH ULPI LOW PIN INTERFACE

General Description The USB3300 is an industrial temperature Hi-Speed USB Physical Layer Transceiver (PHY). The USB3300 uses a low pin count interface (ULPI) to connect to a ULPI compliant Link layer. The ULPI interface reduces the UTMI+ interface from 54 pins to 12 pins using a method of in-band

文件：344.65 Kbytes 页数：11 Pages

SMSC

SMSC Corporation

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

文件：719.61 Kbytes 页数：49 Pages

SMSC

SMSC Corporation

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

文件：960.64 Kbytes 页数：55 Pages

SMSC

SMSC Corporation

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface

文件：676.66 Kbytes 页数：59 Pages

Microchip

微芯科技