USB-2-RTMI中文资料Modules数据手册Trinamic规格书

描述 Description

This USB-2-RTMI offers USB interface conversion for the Real-Time Monitoring Interface of the TMC4671 FOC controller IC. The interface converter is based on the FTDI FT4222H USB High-Speed to SPI bridge. It is USB bus powered and offers basic ESD protection. Please note that it does not include galvanic isolation (USB ground is connected to GND pins of RTMI connector). It offers the same tiny 10pin connector with same pin assignment for the RTMI interface as can be found on the TMC4671 evaluation board. Connection cables are availabel, also.
Technical DetailsDatasheetTechnical DetailsUSB-2-RTMIStatusactiveAxesMotor SupplyPhase Current, RMSMicrostepsUSBRTMIWidth40mmLength20mmHeight7mmDownloadsDatasheetFileTypeSizeDate Manual V1.10 1.1 MBJun 4, 2018, 7:40 AMProduct Support If you need further Information please head over to our Help Center or contact us directly.
Help CenterRelated ProductsTMC4670-BIThe TMC4670 is a single-axis servo motor controller for industrial automation, embedded servo control and other automated equipment applications. It is suitable for 3-phase BLDC and 2-phase stepper motors. The device is designed for an operating voltage of 1.2V, 2.5V and 3.3V . The device provides an a/b/n incremental, digital hall, analog hall and analog sincos encoder and SPI interface.DetailsTMC4670-EVALThe TMC4670-EVAL allows you to explore all functions of the TMC4670-BI. The TMC4670+TMC-UPS-10A70V-EVAL-KIT is a set of one MCU board Landungsbrücke, two Eselsbrücke bridge boards and a TMC-UPS-10A70V-EVAL power stage as well as one TMC4670-EVAL driver board. It allows for a quick and simple start within only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics. For diagnosis, all signals between MCU and TMC4670 are accessible with probes on the Eselsbrücke bridge board. To simplify the transfer to your own processor platform the MCU board can be disconnected.  Additionally required is a power supply (max. 46V).DetailsTMC4671-ESThe TMC4671 is a fully integrated servo controller, providing Field Oriented Control for BLDC/PMSM and 2-phase Stepper Motors as well as DC motors and voice coils. All control functions are implemented in hardware. Integrated ADCs, position sensor interfaces, position interpolators, enable a fully functional servo controller for a wide range of servo applications.DetailsTMC4671-EVALThe TMC4671-EVAL allows you to explore all functions of the TMC4671-ES. The TMC4671+TMC-UPS-10A70V-EVAL-KIT is a set of one MCU board Landungsbrücke, two Eselsbrücke bridge boards and a TMC-UPS-10A70V-EVAL power stage as well as one TMC4671-EVAL driver board. In addition there is a USB adapter for the real-time-monitoring interface (RTMI) available: USB-2-RTMI. It allows for a quick and simple start within only minutes to make your motor turning, while still providing full access to all registers and full functionality and diagnostics. For diagnosis, all signals between MCU and TMC4671 are accessible with probes on the Eselsbrücke bridge board. To simplify the transfer to your own processor platform the MCU board can be disconnected.  Additionally required is a power supply (max. 46V).DetailsTMC4671-BOBThe TMC4671 breakout board is a development board with the dedicated TMC4671-ES chip. It is designed to give users the chance to rapidly prototype their applications - making it possible to immediately check how the motor performs with TMC chips while developing the application's software. DetailsNeed help?No worries, everybody gets stuck sometimes. Even with the how-to documentation and FAQ. Simply let us know which questions you have and our engineers will get you the answers to keep you moving.Contact us

简介

USB-2-RTMI属于开发板套件编程器的配件。由制造生产的USB-2-RTMI配件与此类别中其他器件一起使用的辅助产品。