USB2532数据手册集成电路（IC）的控制器规格书PDF

描述 Description

The Microchip USB2532 is a low-power, OEM configurable, MTT (Multi-Transaction Translator) USB 2.0 hub controller with 2 downstream ports and advanced features for embedded USB applications. The USB2532 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management Addendum and will attach to an upstream port as a Full-Speed hub or as a Full-/Hi-Speed hub. The 2-port hub supports Low-Speed, Full-Speed, and Hi-Speed (if operating as a Hi-Speed hub) downstream devices on all of the enabled downstream ports.



The USB2532 has been specifically optimized for embedded systems where high performance, and minimal BOM costs are critical design requirements. Standby mode power has been minimized and reference clock inputs can be aligned to the customer’s specific application. Additionally, all required resistors on the USB ports are integrated into the hub, including all series termination and pull-up/pulldown resistors on the D+ and D– pins.



The USB2532 supports both upstream battery charger detection and downstream battery charging. The USB2532 integrated battery charger detection circuitry supports the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. These circuits are used to detect the attachment and type of a USB charger and provide an interrupt output to indicate charger information is available to be read from the device’s status registers via the serial interface. The USB2532 provides the battery charging handshake and supports the following USB-IF BC1.2 charging profiles:

DCP: Dedicated Charging Port (Power brick with no data)CDP: Charging Downstream Port (1.5A with data)SDP: Standard Downstream Port (0.5A with data)Custom profiles loaded via SMBus or OTPThe USB2532 provides an additional USB endpoint dedicated for use as a USB to I2C interface, allowing external circuits or devices to be monitored, controlled, or configured via the USB interface.

特性 Features

Highlights
• Hub Controller IC with 2 downstream ports
• USB-IF Battery Charger revision 1.2 support on up and downstream ports (DCP, CDP, SDP)
• Battery charging support for Apple® devices
• FlexConnect: Downstream port 1 able to swap with upstream port, allowing master capable devices to control other devices on the hub
• USB to I2C™ bridge endpoint support
• USB Link Power Management (LPM) support
• SUSPEND pin for remote wakeup indication to host
• Vendor Specific Messaging (VSM) support
• Enhanced OEM configuration options available through a single serial I2C EEPROM, OTP, or SMBus Slave Port
• 36-pin (6x6mm) SQFN, RoHS compliant package
• Footprint compatible with USB2512B
Target Applications
• LCD Monitors and TVs
• Multi-function USB Peripherals
• PC Motherboards
• Set-top Boxes, DVD Players, DVR/PVR
• Printers and Scanners
• PC Media Drive Bay
• Portable Hub Boxes
• Mobile PC Docking
• Embedded Systems

应用 Application

·LCD Monitors and TVs
·Multi-function USB Peripherals
·PC Motherboards
·Set-top Boxes, DVD Players, DVR/PVR
·Printers and Scanners
·PC Media Drive Bay
·Portable Hub Boxes
·Mobile PC Docking
·Embedded Systems

简介

USB2532属于集成电路（IC）的控制器。由制造生产的USB2532控制器该系列产品主要用于在采用不同通信协议和/或信令方法的端点之间提供信息连接。示例包括将 I2C 总线连接到 UART，将 USB 连接到 I2C、SPI、以太网或 UART、以太网 MAC 和 PHY 等的器件。此外，还包括用于通过为点对点通信设计的接口建立多路连接的器件，例如 USB 集线器控制器。