UM232H

UM232H Single Channel USB Hi-Speed FT232H Development Module Datasheet

Introduction TheUM232HisaUSB-to-serial/FIFOdevelopmentmoduleintheFTDIproductrangewhichutilisestheFT232HUSBHi-Speed(480Mb/s)single-portbridgechiptohandletheUSBsignalingandprotocols.TheUM232Hisidealfordevelopmentpurposestoquicklyprovefunctionalityofadding

UM232H

UM232H - 开发模块, UM232H - FT232H; ·Based on the Single chip USB Hi-Speed FT232H device\n·USB 2.0 Hi-Speed (480Mbps) and Full Speed (12Mbps) compatible\n·Entire USB protocol handled on the chip\n·USB bus or self powered options\n·Asynchronous UART transfer data rate up to 12Mbaud\n·UART interface support for 7 or 8 data bits\n·Fully assisted hardware or X-On / X-Off software handshaking\n·Auto-transmit buffer control for RS485 applications\n·1kByte receive and transmit buffers for high data throughput\n·Integrated 3.3V level converter for USB I/O\n;

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signalling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design. The UM232H is a module designed to plug into a standard 0.6\" wide 28 pin DIP socket. The FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to Serial/FIFO IC. It can be configured in a variety of serial or parallel interfaces, such as UART, FIFO or FTDI's MPSSE mode which can be configured to JTAG, SPI and I2C interfaces. The UM232H development module requires USB device drivers, available free, There is the Virtual Com Port driver which allows the UM232H to appear as a serial port allowing legacy applications for serial ports to function over USB. Supported platforms includes current Microsoft® Windows® operating systems, Linux®, Mac OS® and Microsoft Windows CE® version 4.2 onwards.

UM232H

包装：散装 功能：USB 2.0 转串行 FIFO 桥接器 类别：开发板，套件，编程器 评估和演示板及套件 描述：MOD USB HS FT232H EVAL

FTDI, Future Technology Devices International Ltd

UM232H-B-NC

UM232H-B-NC - 接口模块, USB, 1通道, 3.3V, FT232H; ·Breakout converter board\n·Operate at +3.3V voltage levels\n·5V tolerant I/Os\n·No connector\n;

The UM232H-B-NC is a Development Module for FT232H high-speed USB 2.0 to serial/parallel interface connector. The single channel interface IC can be configured to transfer data over UART, FIFO, FT1248, I²C, SPI and GPIO interfaces. The UART signal is available via 8 pads on the PCB.

UM232H-B-WE

UM232H-B-WE - 接口模块, USB, 1通道, 3.3V, FT232H; ·Breakout converter board\n·Operate at +3.3V voltage levels\n·5V tolerant I/Os\n;

The UM232H-B-WE is a Development Module for FT232H high-speed USB 2.0 to serial/parallel interface connector. The single channel interface IC can be configured to transfer data over UART, FIFO, FT1248, I²C, SPI and GPIO interfaces. The UART signal is available via 8, 6-inch flying leads connected to the PCB pads.

UM232H-B

UM232H-B USB to Serial/Parallel Break-Out Module

UM232H-B-NC

包装：散装 功能：USB 2.0 转并口和串口 类别：开发板，套件，编程器 评估和演示板及套件 描述：BRD BRKOUT USB HS FT232H NOCNCTR

FTDI, Future Technology Devices International Ltd

UM232H-B-WE

包装：袋 功能：USB 2.0 转并口和串口 类别：开发板，套件，编程器 评估和演示板及套件 描述：BRD BRKOUT USB HS FT232H WIREEND

FTDI, Future Technology Devices International Ltd