UM232H Single Channel USB Hi-Speed FT232H Development Module Datasheet

Introduction The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signaling and protocols. The UM232H is ideal for development purposes to quickly prove functionality of adding

文件：664.48 Kbytes 页数：25 Pages

FTDI

飞特帝亚

UM232H-B USB to Serial/Parallel Break-Out Module

文件：573.53 Kbytes 页数：16 Pages

FTDI

飞特帝亚

UM232H - 开发模块, UM232H - FT232H

The UM232H is a USB-to-serial/FIFO development module in the FTDI product range which utilises the FT232H USB Hi-Speed (480Mb/s) single-port bridge chip to handle the USB signalling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design. T ·Based on the Single chip USB Hi-Speed FT232H device\n·USB 2.0 Hi-Speed (480Mbps) and Full Speed (12Mbps) compatible\n·Entire USB protocol handled on the chip\n·USB bus or self powered options\n·Asynchronous UART transfer data rate up to 12Mbaud\n·UART interface support for 7 or 8 data bits\n·Fully ;

FTDI

飞特帝亚

包装：散装 功能：USB 2.0 转串行 FIFO 桥接器 类别：开发板，套件，编程器 评估和演示板及套件 描述：MOD USB HS FT232H EVAL

FTDI, Future Technology Devices International Ltd

UM232H-B-NC - 接口模块, USB, 1通道, 3.3V, FT232H

The UM232H-B-NC is a Development Module for FT232H high-speed USB 2.0 to serial/parallel interface connector. The single channel interface IC can be configured to transfer data over UART, FIFO, FT1248, I²C, SPI and GPIO interfaces. The UART signal is available via 8 pads on the PCB. ·Breakout converter board\n·Operate at +3.3V voltage levels\n·5V tolerant I/Os\n·No connector;

FTDI

飞特帝亚

UM232H-B-WE - 接口模块, USB, 1通道, 3.3V, FT232H

The UM232H-B-WE is a Development Module for FT232H high-speed USB 2.0 to serial/parallel interface connector. The single channel interface IC can be configured to transfer data over UART, FIFO, FT1248, I²C, SPI and GPIO interfaces. The UART signal is available via 8, 6-inch flying leads connected to ·Breakout converter board\n·Operate at +3.3V voltage levels\n·5V tolerant I/Os;

FTDI

飞特帝亚

包装：散装 功能：USB 2.0 转并口和串口 类别：开发板，套件，编程器 评估和演示板及套件 描述：BRD BRKOUT USB HS FT232H NOCNCTR

FTDI, Future Technology Devices International Ltd

包装：袋 功能：USB 2.0 转并口和串口 类别：开发板，套件，编程器 评估和演示板及套件 描述：BRD BRKOUT USB HS FT232H WIREEND

FTDI, Future Technology Devices International Ltd