UCC21320-Q1中文资料Automotive 3.75kVrms, 4A/6A dual-channel isolated gate driver w/ programmable deadtime in DWK pkg数据手册TI规格书

描述 Description

The UCC21320-Q1 is an isolated dual-channel gate drivers with 4-A source and 6-A sink peak current. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.

The input side is isolated from the two output drivers by a 3.75-kVRMS basic isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1500 VDC.

Every driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). A disable pin shuts down both outputs simultaneously, and allows normal operation when left open or grounded. As a fail-safe measure, primary-side logic failures force both outputs low.

Each device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All supply voltage pins have under voltage lock-out (UVLO) protection.

With all these advanced features, the UCC21320-Q1 enables high efficiency, high power density, and robustness.

特性 Features

• 4-A peak source, 6-A peak sink output
• Up to 25-V VDD output drive supply
• Switching parameters:
• 10-ns minimum pulse width
• 6-ns maximum pulse-width distortion
• Common-mode transient immunity (CMTI) greater than 100 V/ns
• Programmable overlap and dead time
• 3.3mm spacing between driver channels
• Operating temperature range –40 to +125°C
• Isolation barrier life >40 years
• Rejects input pulses and noise transients shorter than 5 ns
• Qualified for automotive applications
• Device temperature grade 1
• Device CDM ESD classification level C6