UC3873数据手册UTC中文资料规格书

描述 Description

The  UC3873 is a high performance current mode PWM controller ideally suited for low standby power. Low VDD startup current make the power reliable on startup design and a large value resistor could be used in the startup circuit to minimize the standby power. At no load condition, the IC operates in power-saving mode for lower standby power, decreasing frequency for Higher conversion efficiency at light load condition.   The  UC3873 contains protection with automatic recovery including OLP (over load protection), programming OTP (over temperature protection), OVP (over voltage protection), UVLO (VDDover voltage clamp and under voltage lockout).To protect the power MOSFET, Gate-drive output is fixed up to 15V max. The UC3873 contains protection OCP (cycle-by-cycle current limiting).The internal slope compensation  improves system stability at high PWM duty cycle output. Leading-edge blanking on current sense input removes the signal glitch, which offering minimal external component count in the design. Excellent EMI performance is achieved with UTC proprietary frequency hopping technique (ZL201020615247.1) together with soft driver control. Audio noise is eliminated due to switch frequency more than 20kHz during operation. The UC3873 has such applications as: battery charger, power adaptor, set-top box power supplies, ink jet printers, open-frame SMPS.

特性 Features

UTC proprietary frequency hopping technology for Improved EMI performance. Power-saving mode for high light-load and standby efficiencySoft Start  Dynamic peak current limiting for constant output powerBuilt-in synchronized slope compensationOLP,OVP and VDD clamp for higher securityProgramming OTP for higher securityFixed switch frequency 65kHzGate output voltage clamped at 15VLow start-up currentCycle-by-cycle Current LimitingUnder voltage lockout (UVLO)Few external components required