TXS0104E-Q1 Automotive 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 • No direction-control signa

文件：1.34599 Mbytes 页数：28 Pages

TI

德州仪器

TXS0104E 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • No direction-control signal needed • Maximum data rates: – 24Mbps (push pull) – 2Mbps (open drain) • Available in the Texas Instruments NanoFree™ package • 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – VCCA or VC

文件：2.20453 Mbytes 页数：43 Pages

TI

德州仪器

TXS0104E-Q1 Automotive 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 • No direction-control signa

文件：1.51735 Mbytes 页数：32 Pages

TI

德州仪器

TXS0104E 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • No direction-control signal needed • Maximum data rates: – 24Mbps (push pull) – 2Mbps (open drain) • Available in the Texas Instruments NanoFree™ package • 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – VCCA or VC

文件：2.42142 Mbytes 页数：47 Pages

TI

德州仪器

TXS0104E-Q1 Automotive 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 • No direction-control signa

文件：1.70367 Mbytes 页数：35 Pages

TI

德州仪器

4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

文件：853.26 Kbytes 页数：25 Pages

TI

德州仪器

TXS0104E 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

文件：1.86923 Mbytes 页数：41 Pages

TI

德州仪器

汽车类用于漏极开路应用的 4 位双向电压电平转换器

由于电压不匹配，TXS0104E-Q1 器件连接芯片与芯片间的非兼容逻辑通信。这款自动导向转换器可方便地用来在无需主机方向控制的情况下缩小之间的差距。在无需主机干预的情况下，每个通道可混合使用，并且可以与不同的输出类型（开漏或推挽）和混合数据流（发送或接收）相匹配。这个 4 位非反向转换器使用两个独立的可配置电源轨。A 和 B 端口被设计用来分别跟踪 VCCA 和 VCCB。VCCB 引脚在 VCCA 引脚接受 1.65V 至 3.6V 之间的任一电源电压的同时，接受 2.3V 至 5.5V 之间的任何电源电压，这样的话，VCCA 小于或等于 VCCB。这个跟踪功能可实现 1.8V，2.5V， • 汽车电子 应用认证末尾新增了一段内容\n• 器件温度 1 级：-40℃ 至 +125℃ 的环境运行温度范围\n• 器件组件充电模式 (CDM) ESD 分类等级 C6\n• 无需方向控制信号\n• 最大值 24Mbps（推挽）\n• A 端口上 1.65V 至 3.6V，B 端口上 2.3V 至 5.5V (VCCA ≤ VCCB)\n• 静电放电 (ESD) 保护性能超过 JESD 22 规范要求 \n• 2000V 人体放电模式 (A114-B)\n• B 端口 \n• 1000V 组件充电模式 (C101)\n• IEC 61000-4-2 ESD（B 端口） \n• ±10kV 空;

TI

德州仪器

TXS0104E-Q1 Automotive 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 • No direction-control signa

文件：1.34599 Mbytes 页数：28 Pages

TI

德州仪器

TXS0104E-Q1 Automotive 4-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Device temperature grade 1: –40°C to +125°C ambient operating temperature range – Device HBM ESD Classification Level 2 – Device CDM ESD Classification Level C6 • No direction-control signa

文件：1.51735 Mbytes 页数：32 Pages

TI

德州仪器