首页>TXS0104E-Q1_V02>规格书详情
TXS0104E-Q1_V02中文资料PDF规格书
TXS0104E-Q1_V02规格书详情
1 Features
• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C6
• No direction-control signal required
• Maximum data rates:
– 24 Mbps maximum (push pull)
– 2 Mbps (open drain)
• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B
port (VCCA ≤ VCCB)
• No power-supply sequencing required—VCCA or
VCCB can be ramped first
• ESD protection exceeds JESD 22:
– A Port
• 2000-V Human-Body Model (A114-B)
• 1000-V Charged-Device Model (C101)
– B Port
• 15-kV Human-Body Model (A114-B)
• 1000-V Charged-Device Model (C101)
• IEC 61000-4-2 ESD (B port)
– ±8-kV Contact Discharge
– ±10-kV Air-Gap Discharge
2 Applications
• Automotive infotainment, advance driver
assistance systems (ADAS)
• Isolates and level translates between main
processor and peripheral modules
• I2C or 1-wire voltage-level translation
3 Description
The TXS0104E-Q1 device connects an incompatible
logic communication from chip-to-chip due to voltage
mismatch. This auto-direction translator can be
conveniently used to bridge the gap without the
need of direction control from the host. Each channel
can be mixed and matched with different output
types (open-drain or push-pull) and mixed data flows
(transmit or receive) without intervention from the
host. This 4-bit noninverting translator uses two
separate configurable power-supply rails. The A and
B ports are designed to track VCCA and VCCB
respectively. The VCCB pin accepts any supply voltage
from 2.3 V to 5.5 V while the VCCA pin accepts any
supply voltage from 1.65 V to 3.6 V such that VCCA
is less than or equal to VCCB. This tracking allows
for low-voltage bidirectional translation between any
of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs
are placed in the high-impedance state.
The TXS0104E-Q1 device is designed so that the OE
input circuit is supplied by VCCA.
To be in the high-impedance state during power up
or power down, the OE pin must be tied to the GND
pin through a pull down resistor; the minimum value
of the resistor is determined by the current-sourcing
capability of the driver.
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
TI/德州仪器 |
18+ |
TSSOP-14 |
10403 |
只做进口原装订货货期短到货快 |
询价 | ||
23+ |
N/A |
85200 |
正品授权货源可靠 |
询价 | |||
TI |
21+ |
TSSOP14 |
5000 |
原装现货/假一赔十/支持第三方检验 |
询价 | ||
TI |
21+ |
TSSOP |
1568 |
10年芯程,只做原装正品现货,欢迎加微信垂询! |
询价 | ||
TI |
21+ |
TSSOP14 |
6000 |
原装正品 |
询价 | ||
TI/德州仪器 |
22+ |
TSSOP-14 |
9600 |
原装现货,优势供应,支持实单! |
询价 | ||
21+ |
12588 |
原装正品 |
询价 | ||||
TI |
2020+ |
TSSOP14 |
80000 |
只做自己库存,全新原装进口正品假一赔百,可开13%增 |
询价 | ||
TI/德州仪器 |
23+ |
TSSOP14 |
50000 |
全新原装正品现货,支持订货 |
询价 | ||
TI |
1936+ |
TSSOP-14 |
6852 |
只做原装正品现货或订货!假一赔十! |
询价 |