TVS0701电路保护的TVS-混合技术规格书PDF中文资料

TVS0701属于电路保护的TVS-混合技术。由德州仪器制造生产的TVS0701TVS - 混合技术混合技术 TVS（瞬态电压抑制器）产品族中的产品属于过压保护产品，其中结合了基于多种技术的保护机制，例如串联连接的 MOV（金属氧化物压敏电阻）和 GDT（气体放电管），旨在同时获得低漏电流和自恢复箝位工作特性。

1 Features

1• Protection Against 1-kV, 42-Ω IEC 61000-4-5

Surge Test for Industrial Signal Lines

• Bidirectional Polarity Enables Protection Against

Bipolar Signaling or Miswiring Conditions

• Clamping Voltage of 11 V at 30-A, 8/20-μs Surge

Current

• Standoff Voltage: ±7 V

• Small 3-mm × 3-mm SON Footprint

• Survives Over 5,000 Repetitive Strikes of 30-A,

8/20-μs Surge Current at 125°C

• Robust Surge Protection

– IEC61000-4-5 (8/20 μs): 30 A

– IEC61643-321 (10/1000 μs): 15 A

• Low Leakage Current

– 0.25-nA Typical at 27°C

– 200-nA Maximum at 85°C

• Low Capacitance: 77 pF

• Integrated Level 4 IEC 61000-4-2 ESD Protection

2 Applications

• Industrial Sensors

• Solid-State Drives

• 5-V Power Lines

• Appliances

• Medical Equipment

• Electrical Grid Protection and Control

3 Description

The TVS0701 device shunts up to 30 A of IEC

61000-4-5 fault current to protect systems from highpower

transients or lightning strikes. The device

survives the common industrial signal line EMC

requirement of 1-kV IEC 61000-4-5 open circuit

voltage coupled through a 42-Ω impedance. The

TVS0701 uses a feedback mechanism to ensure

precise flat clamping during a fault, keeping system

exposure lower than traditional TVS diodes. The tight

voltage regulation allows designers to confidently

select system components with a lower voltage

tolerance, lowering system costs and complexity

without sacrificing robustness. The TVS0701 has a

±7-V operating range to enable operation in systems

that require protection against reverse wiring

conditions.

In addition, the TVS0701 is available in a small SON

footprint designed for space constrained applications,

offering a significant size reduction compared to

standard SMA and SMB packages. Low device

leakage and capacitance ensure a minimal effect on

the protected line. To ensure robust protection over

the lifetime of the product, TI tests the TVS0701

against 5000 repetitive surge strikes at 125°C with no

shift in device performance.

The TVS0701 is part of TI's Flat-Clamp family of

surge devices. For a deeper look at the Flat-Clamp

family, refer to the Flat-Clamp Surge Protection

Technology for Efficient System Protection white

paper.