360 mW mono amplifier with standby mode

Features • Operating from VCC = 2 V to 5.5 V • Standby mode active high (TS419) or low (TS421) • Output power into 16 Ω: 367 mW @ 5 V with 10% THD+N max or 295 mW @ 5 V and 110 mW @ 3.3 V with 1% THD+N max. • Low current consumption: 2.5 mA max. • High signal-to-noise ratio: 95 dB (A

文件：1.72805 Mbytes 页数：42 Pages

STMICROELECTRONICS

意法半导体

Time Delay Relays - Dedicated - Delay-on-Break

Description The TSDB Series is designed for more demanding commercial and industrial applications where small size, and accurate performance are required. The factory calibration for fixed time delays is within 1 of the target time delay. The repeat accuracy, under stable conditions, is 0.5 o

文件：514.39 Kbytes 页数：2 Pages

Littelfuse

力特

Time Delay Relays - Dedicated - Single Shot

Description The TSDS Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1 of the target time delay. The repeat accuracy, under stable conditions, is 0.5 of

文件：516.799 Kbytes 页数：2 Pages

Littelfuse

力特

Time Delay Relays - Dedicated - Single Shot

Description The TSS Series is a totally solid-state timing module. Its 1A rated, solid-state output provides an excellent method of time control for exposures, dispensing, or for increasing or decreasing a switch closure. Time delays from 0.05 to 600 seconds, in 4 ranges, cover 90 of all OEM

文件：528.13 Kbytes 页数：2 Pages

Littelfuse

力特