TPSI3050MDWZR中文资料德州仪器数据手册PDF规格书

1 Features

• No isolated secondary supply required

• Drives external power transistors or SCRs

• 5kVRMS reinforced isolation

• 10V gate drive; 1.5A/2.5A peak source/sink current

• Up to 50mW supply for external auxiliary circuitry

• Supports AC or DC switching

• Supports two-wire or three-wire modes

• Seven levels of power transfer, resistor selectable

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Temperature range –55°C to 125°C ambient

• Safety-related certifications

– Planned: 7071VPK reinforced isolation per DIN

EN IEC 60747-17 (VDE 0884-17)

– Planned: 5kVRMS isolation for 1 minute per UL

1577

2 Applications

• Solid state relay (SSR)

• Avionics

• Battery management system

• Hybrid, electric, and powertrain system

• Building automation

• Factory automation and control

3 Description

The TPSI3050M is a fully integrated, isolated switch

driver, which when combined with an external power

switch, forms a complete isolated solid state relay

(SSR). With a nominal gate drive voltage of 10V with

1.5A and 3.0A peak source and sink current, a large

variety of external power switches can be chosen to

meet a wide range of applications. The TPSI3050M

generates its own secondary bias supply from the

power received from its primary side, so no isolated

secondary supply bias is required. Additionally, the

TPSI3050M can optionally supply power to external

supporting circuitry for various application needs.

The TPSI3050M supports two modes of operation

based on the number of input pins required. In

two-wire mode, typically found in driving mechanical

relays, controlling the switch requires only two pins

and supports a wide voltage range of operation of

6.5V to 48V. In three-wire mode, the primary supply

of 3V to 5.5V is supplied externally, and the switch is

controlled through a separate enable.

The secondary side provides a regulated, floating

supply rail of 10V for driving a large variety of power

switches with no need for a secondary bias supply.

The application can drive single power switches

for DC applications or dual back-to-back power

switches for AC applications, as well as various

types of SCR. The TPSI3050M integrated isolation

protection is extremely robust with much higher

reliability, lower power consumption, and increased

temperature ranges than traditional mechanical relays

and optocouplers.

The power transfer of the TPSI3050M can be

adjusted by selecting one of seven power level

settings using an external resistor from the PXFR pin

to VSSP. This action allows for tradeoffs in power

dissipation versus power provided on the secondary

depending on the needs of the application.