TPS60123中文资料具有电源正常状态检测器的稳压 100mA、3.3V 高效电荷泵直流/直流转换器数据手册TI规格书

描述 Description

The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They can deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current. The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).

特性 Features

• High Average Efficiency Over Input Voltage Range Because of Special Switching Topology
• Regulated 3.3-V or 3-V ±4% Output Voltage
• Only Four External Components Required
• 0.05-uA Shutdown Current
• Integrated Low Battery and Power Good Detectors
• Applications
• Portable Instruments
• Miniature Equipment
• PDAs, Organizers, Laptops
• Handheld Instrumentation
• Cordless Phones

PowerPAD is a trademark of Texas Instruments Incorporated.