TPS2597数据手册集成电路（IC）的电流调节/管理规格书PDF

描述 Description

The TPS2597xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if the input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

特性 Features

• Wide operating input voltage range: 2.7 V to 23 V
• 28-V absolute maximum

• Integrated FET with low on-resistance: RON = 10.8 mΩ (typ.)
• Fast overvoltage protection
• Overvoltage clamp (OVC) with pin-selectable threshold (3.89 V, 5.76 V, 13.88 V) and 5-µs (typical) response time or
• Adjustable overvoltage lockout (OVLO) with 1.2-µs (typical) response time

• Overcurrent protection with load current monitor output (ILM)
• Active current limit or circuit-breaker options
• Adjustable threshold (ILIM) 0.8 A–8 A
• ±10% accuracy for ILIM > 1.7 A

• Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
• Output load current monitor accuracy: ±5% (IOUT ≥ 3 A)

• Fast-trip response for short-circuit protection
• 550-ns (typical) response time
• Adjustable (2 × ILIM) and fixed thresholds

• Active high enable input with adjustable undervoltage lockout threshold (UVLO)
• Adjustable output slew rate control (dVdt)
• Overtemperature protection
• Digital outputs
• Fault indication (FLT) OR
• Power Good indication (PG) with adjustable threshold (PGTH)

• UL 2367 recognition (pending)
• IEC 62368 CB certification (pending)
• Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch