TPS2552D开发板套件编程器的评估演示板及套件规格书PDF中文资料

TPS2552D属于开发板套件编程器的评估演示板及套件。由德州仪器制造生产的TPS2552D评估和演示板及套件该系列产品提供了一种方便的方法，在经过验证的实施环境中评估某些重点器件的性能或特性。评估方法通常有完善的文档说明，并且视乎具体情况由评估软件提供支持。产品通常由印刷电路板组成，板上已装有重点器件以及必要或有用的支持元器件，另外也可能包括其他组件，例如电缆或电源。对于数量特别多或类别独特的器件类别(如 ADC、DAC 和开关模式电源)，评估平台可组合为一个单独的产品系列。

1 Features

1• Up to 1.5 A Maximum Load Current

• ±6% Current-Limit Accuracy at 1.7 A (Typ)

• Meets USB Current-Limiting Requirements

• Backwards Compatible with TPS2550/51

• Adjustable Current Limit, 75 mA–1700 mA (Typ)

• Constant-Current (TPS2552D and TPS2553D)

• TPS2552D (Enable Low) and TPS2553D (Enable

High)

• Fast Overcurrent Response - 2 μs (Typ)

• 85-mΩ High-Side MOSFET (DBV Package)

• Reverse Input-Output Voltage Protection

• Operating Range: 2.7 V to 6.5 V

• Built-in Soft-Start

• 15 kV ESD Protection per IEC 61000-4-2 (With

External Capacitance)

• UL Listed – File No. E169910 and NEMKO

IEC60950-1-am1 ed2.0

• See the TI Switch Portfolio

2 Applications

• USB Ports/Hubs

• Digital TV

• Set-Top Boxes

• VOIP Phones

3 Description

The TPS2552D and TPS2553D power-distribution

switches are intended for applications where

precision current limiting is required or heavy

capacitive loads and short circuits are encountered

and provide up to 1.5 A of continuous load current.

These devices offer a programmable current-limit

threshold between 75 mA and 1.7 A (typ) via an

external resistor. Current-limit accuracy as tight as

±6% can be achieved at the higher current-limit

settings. The power-switch rise and fall times are

controlled to minimize current surges during turn

on/off.

The TPS2552D/3D devices limit the output current to

a safe level by using a constant-current mode when

the output load exceeds the current-limit threshold.

An internal reverse-voltage comparator disables the

power-switch when the output voltage is driven higher

than the input to protect devices on the input side of

the switch. The FAULT output asserts low during

overcurrent and reverse-voltage conditions.