TPS25200DRVR集成电路（IC）的电流调节/管理规格书PDF中文资料

TPS25200DRVR属于集成电路（IC）的电流调节/管理。由德州仪器制造生产的TPS25200DRVR电流调节/管理电流调节和管理 IC 是用于监视和调节电路电流的半导体器件。功能包括电流表、限流、电流镜、电流监控器、电流调节器、电流纹波抑制器、电流检测、电流源、电流开关和电子保险丝，电流输出从 100 μA 至 50 A 可调。

1 Features

• 2.5V to 6.5V operation

• Input withstands up to 20V

• 7.6V input overvoltage shutoff

• 5.25V to 5.55V fixed overvoltage clamp

• 0.6μs overvoltage lockout response

• 3.5μs short circuit response

• Integrated 60mΩ high-side MOSFET

• Up to 2.6A continuous load current

• ±6% current-limit accuracy at 2.9A

• Reverse current blocking while disabled

• Built-in soft start

• Pin-to-pin compatible with TPS2553

• UL 2367 recognized

– File no. 169910

– RILIM ≥ 33kΩ (3.12A maximum)

2 Applications

• USB power switches

• USB target devices

• Cell, smart phones

• 3G, 4G wireless data cards

• Solid-state drives (SSD)

• 3V or 5V adapter powered devices

3 Description

The TPS25200 is a 5V eFuse with precision

current limit and overvoltage clamp. The device

provides robust protection for load and source during

overvoltage and overcurrent events.

The TPS25200 is an intelligent protected load switch

with VIN tolerant to 20V. In the event that an incorrect

voltage is applied at IN, the output clamps to 5.4V to

protect the load. If the voltage at IN exceeds 7.6V, the

device disconnects the load to prevent damage to the

device and/or load.

The TPS25200 has an internal 60mΩ power switch

and is intended for protecting source, device, and

load under a variety of abnormal conditions. The

device provides up to 2.6A of continuous load current.

Current limit is programmable from 85mA to 2.9A with

a single resistor to ground. During overload events

output current is limited to the level set by RILIM. If

a persistent overload occurs the device eventually

goes into thermal shutoff to prevent damage to the

TPS25200.