TPS2514DBVR集成电路（IC）的电源管理-专用规格书PDF中文资料

TPS2514DBVR属于集成电路（IC）的电源管理-专用。由德州仪器制造生产的TPS2514DBVR电源管理 - 专用专用型电源管理集成电路 (PMIC) 用于电源的控制或操作，适合特定或小范围的目标应用，例如汽车气囊管理、电容器组平衡、AC 公共电力监控、存储器总线端接、接地故障检测、能量收集、小型引擎管理、处理器或芯片集专用电压调节、负载突降保护、触觉驱动器、热电制冷器控制等。

1 Features

1• Supports USB DCP shorting D+ line to

D– line per USB battery charging specification,

revision 1.2 (BC1.2)

• Supports shorted mode (shorting D+ line to D–

line) per Chinese Telecommunication Industry

Standard YD/T 1591-2009

• Supports USB DCP applying 2.7 V on D+ Line

and 2 V on D- line (or USB DCP applying

2 V on D+ line and 2.7 V on D– line) (TPS2513,

TPS2514)

• Supports USB DCP applying 2.7 V on D+ line and

2.7 V on D- line (TPS2513A, TPS2514A)

• Supports USB DCP applying 1.2 V on

D+ and D– Lines

• Automatically Switch D+ and D– Lines

Connections for an Attached Device

• Dual USB Port Controller

(TPS2513, TPS2513A)

• Single USB port controller

(TPS2514, TPS2514A)

• Operating range: 4.5 V to 5.5 V

• Available in SOT23-6 package

2 Applications

• Vehicle USB power chargers

• AC-DC adapters with USB ports

• Other USB chargers

3 Description

The TPS251xx devices are USB dedicated charging

port (DCP) controllers. An auto-detect feature

monitors USB data line voltage, and automatically

provides the correct electrical signatures on the data

lines to charge compliant devices among the

following dedicated charging schemes:

1. Divider 1 DCP, required to apply 2 V and 2.7 V

on the D+ and D– Lines respectively (TPS2513,

TPS2514)

2. Divider 2 DCP, required to apply 2.7 V and 2 V

on the D+ and D– Lines respectively (TPS2513,

TPS2514)

3. Divider 3 DCP, required to apply 2.7 V and 2.7 V

on the D+ and D– Lines respectively (TPS2513A,

TPS2514A)

4. BC1.2 DCP, required to short the D+ Line to the

D– Line

5. Chinese Telecom Standard YD/T 1591-2009

Shorted Mode, required to short the D+ Line to

the D– Line

6. 1.2 V on both D+ and D– Lines