TMP275AQDRQ1传感器变送器的温度传感器-模拟数字输出规格书PDF中文资料

TMP275AQDRQ1属于传感器变送器的温度传感器-模拟数字输出。由德州仪器制造生产的TMP275AQDRQ1温度传感器 - 模拟和数字输出模拟和数字输出温度传感器可用于测量环境热能量。特征包括传感器类型、本地感测温度、远程感测温度、输出类型、电源电压和分辨率。传感器类型为模拟本地/远程/红外、模拟数字、本地/远程、数字本地/远程/红外或内部，感应温度范围为 -55°C 至 200°C。

1 Features

1• AEC-Q100 Qualified with:

– Temperature Grade 1: –40°C to +125°C

Ambient Operation Temperature Range

– HBM ESD Classification Level 2

– CDM ESD Classification Level C6

• High Accuracy:

– ±0.75°C (Maximum) from −10°C to +85°C

– ±1.5°C (Maximum) from −40°C to +125°C

• Low Quiescent Current:

– 50 μA (Typical)

– 0.1 μA (Standby)

• Resolution: 9 to 12 Bits, User-Selectable

• Digital Output: SMBus™, Two-Wire, and I2C

Interface Compatibility

• 8 I2C, SMBus Addresses

• Wide Supply Range: 2.7 V to 5.5 V

• Small 8-Pin VSSOP and SOIC Packages

• No Specified Power-Up Sequence Required, Two-

Wire Bus Pullups Can Be Enabled Before V+

2 Applications

• Climate Controls

• Infotainment Processor Management

• Airflow Sensors

• Battery Control Units

• Engine Control Units

• UREA Sensors

• Water Pumps

• HID Lamps

• Airbag Control Units

3 Description

The TMP275-Q1 is a ±0.75°C, accurate integrated

digital temperature sensor with a 12-bit, analog-todigital

converter (ADC) that can operate on a supply

voltage as low as 2.7 V and is pin- and registercompatible

with the Texas Instruments' LM75,

TMP75, TMP75B, and TMP175 devices. The

TMP275-Q1 device is available in 8-pin SOIC and

VSSOP packages and requires no external

components to sense temperature. The device is

capable of reading temperatures with a maximum

resolution of 0.0625°C (12 bits) and as low as 0.5°C

(9 bits), thus allowing the user to maximize efficiency

by programming for higher resolution or faster

conversion time. The device is specified over the

temperature range of –40°C to +125°C.

The TMP275-Q1 device features SMBus and twowire

interface compatibility and allows up to eight

devices on the same bus with the SMBus

overtemperature alert function. The factory-calibrated

temperature accuracy and the noise-immune digital

interface make the TMP275-Q1 the preferred solution

for temperature compensation of other sensors and

electronic components, without the need for

additional system-level calibration or elaborate board

layout for distributed temperature sensing.