TMP116NAIDRVR.A中文资料德州仪器数据手册PDF规格书

1 Features

1• TMP116 accuracy without calibration:

– ±0.2°C (maximum) from –10°C to +85°C

– ±0.25°C (maximum) from –40°C to +105°C

– ±0.3°C (maximum) from +105°C to +125°C

• TMP116N accuracy, no calibration needed:

– ±0.3°C (maximum) from –25°C to +85°C

– ±0.4°C (maximum) from –40°C to +125°C

• Low Quiescent Current:

– 3.5-μA, 1-Hz conversion cycle

– 250-nA shutdown current

• Supply range: 1.9 V to 5.5 V

• Resolution: 16 bits at 0.0078°C (1 LSB)

• Programmable temperature alert limits

• Selectable averaging

• General-purpose EEPROM: 64 bits

• NIST traceability

• SMBus™, I2C interface compatibility

2 Applications

• Medical grade: meets ASTM and ISO spec

• Environmental monitoring and thermostats

• Wearables

• Asset tracking and cold chain

• Gas meters and heat meters

• Test and measurement

• RTDs replacement: PT100, PT500, PT1000

• Cold-junction compensation of thermocouples

3 Description

The TMP116 family (TMP116, TMP116N) consist of

low-power, high-precision temperature sensors with

integrated EEPROM memory. The TMP116 provides

a 16-bit temperature result with a resolution of

0.0078°C and an accuracy of up to ±0.2°C with no

calibration. The TMP116 is compatible with the I2Cand

SMBus interface, has programmable alert

functionality, and supports up to four devices on a

single bus.

The TMP116 consumes minimal current that, in

addition to providing power savings, minimizes selfheating

and improves measurement accuracy. The

TMP116 operates from 1.9 V to 5.5 V and typically

consumes 3.5 μA.

Across the device operating temperature range of

–55°C to +125°C, the TMP116 exceeds the accuracy

of a class A RTD, while consuming less than one fifth

of the typical excitation current for a PT100 RTD. The

TMP116 is easier to use than RTDs, eliminating the

need for calibration, external circuitry, matched

traces, and Kelvin connections.

The TMP116 units are 100% tested on a production

setup that is NIST traceable and verified with

equipment that is calibrated to ISO/IEC 17025

accredited standards.