MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：781.95 Kbytes 页数：27 Pages

TRINAMIC

Motor mountable stepper motor controller/driver module 18 to 55V, 5.5A, 256 µSteps, with USB, S/D, RS232 and RS485 Interface, StallGuard, CoolStep

The TMCM-1180 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2™, CoolStep™ and SpreadCycle™ chopper technology and has a trapezoidal ramp generator. The TMCM-1180 is capable of driving up to 7.8A Electrical data\n• Supply voltage: +24V DC or +48V DC nominal\n\n• Motor current: up to 5.5A RMS (programmable) \n\n\nPANdrive motor\n• Two phase bipolar stepper motor with up to 5.5A RMS nom. coil current\n\n• Holding torque: 7Nm\n\n\nEncoder\n• Integrated sensOstep™ mmagnetic encoder (max. 256 inc;

ADI

亚德诺

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：781.95 Kbytes 页数：27 Pages

TRINAMIC

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：781.95 Kbytes 页数：27 Pages

TRINAMIC

MECHATRONIC DRIVE WITH STEPPER MOTOR

文件：781.95 Kbytes 页数：27 Pages

TRINAMIC

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 配件 描述：CABLE LOOM FOR TMCM-1181

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 5.5A 18-55V LOAD

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 5.5A 18-55V LOAD

Trinamic Motion Control GmbH