MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes 页数：26 Pages

TRINAMIC

Motor mountable stepper motor controller/driver module 9 to 28V, 2A, 256 µSteps, with USB, CAN and RS485 Interface, StallGuard, CoolStep

The TMCM-1140 is a single axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by ADI Trinamic StallGuard2™, CoolStep™ and SpreadCycle™ chopper technology and has a trapezoidal ramp generator. The TMCM-1140 is capable of driving up to 2.8A Motion controller\n• On the fly alteration of motor parameters (e.g. position, velocity, acceleration)\n• High performance microcontroller for overall system control and serial communication protocol handling\n• Up to 256 microsteps per full step\n• High-efficient operation, low power dissipation\n•;

ADI

亚德诺

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes 页数：26 Pages

TRINAMIC

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes 页数：26 Pages

TRINAMIC

MODULE FOR STEPPER MOTORS

文件：972.57 Kbytes 页数：26 Pages

TRINAMIC

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 2.8A 9-28V LOAD

Trinamic Motion Control GmbH

包装：散装 类别：电机，电磁阀，螺线管，驱动器板/模块 电机驱动器板，模块 描述：STEPPER DRIVER 2.8A 9-28V LOAD

Trinamic Motion Control GmbH