TLIN1029-Q1数据手册TI中文资料规格书

描述 Description

The TLIN1029-Q1 is a Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up andprotection features, complaint to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS 17987–4.2standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networksusing data rates up to 20 kbps. The TLIN1029-Q1 is designed to support 12 V applications with wider operatingvoltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbpsfor in-line programming. The TLIN1029-Q1converts the LIN protocol data stream on the TXD input into aLIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions(EME). The receiver converts the data stream to logic level signals that are sent to themicroprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using thesleep mode which allows wake-up via LIN bus or pin. The integrated resistor, ESD and faultprotection allows designers to save board space in their applications.

特性 Features

• 符合面向汽车应用的 AEC-Q100 标准
• 器件工作环境温度：–40°C 至 125°C
• 器件 HBM 认证等级：±8kV
• 器件 CDM 认证等级：±1.5kV

• 符合 LIN 2.0、LIN 2.1、LIN 2.2、LIN 2.2A 和 ISO/DIS 17987–4.2标准
• 符合适用于 LIN 的 SAEJ2602推荐实践的要求
• 支持 12V应用
• LIN 数据传输速率高达 20 kbps。
• 宽运行范围
• 4V 至 36V电源电压
• ±45V LIN 总线故障保护

• 休眠模式：超低电流消耗支持以下类型的唤醒事件：
• LIN 总线
• 通过 EN引脚的本地唤醒

• 上电/断电无毛刺脉冲运行
• 保护 特性：
• VSUP 欠压保护
• TXD主显性超时保护 (DTO)
• 热关断保护
• 系统级未驱动节点或接地断开故障保护。

• 采用 SOIC (8)封装和无引线 VSON (8) 封装，提高了自动光学检测 (AOI) 能力