TLI5012BE1000数据手册传感器变送器的位置传感器-角度、线性位置测量规格书PDF

描述 Description

XENSIV™- TLI5012B E1000 angle sensor iGMR, economic with SPI compatible interface

特性 Features

The TLI5012B E1000 has the following features and pre-configuration. The configuration can be changed via SSC interface.

• Giant Magneto Resistance (GMR)-based principle
• Integrated magnetic field sensing for angle measurement
• 360° angle measurement with revolution counter and angle speed measurement
• Max. 1.9° angle error over lifetime and temperature-range with activated auto-calibration
• Synchronous Serial Communication (SSC) with 15 bit representation of absolute angle value (0.01° resolution)
• Incremental Interface (IIF) with 12 bit resolution of angle value on the output (one count per 0.088° angle step)
• Incremental Interface (IIF) in A/B mode with absolut count enabled (provides absolute value at output)
• Fast angle update period (42.7μs)
• Autocalibration mode 1 enabled
• Prediction disabled
• Hysteresis set to 0.703°
• Bus mode operation of multiple sensors on one line is possible with SSC in open-drain configuration
• Diagnostic functions and status information
• IFA/IFB/IFC pins set to push-pull output
• Bi-directional SSC interface. DATA pin set to push-pull output with 8Mbit/s baud rate (2Mbit/s in open-drain)
• IFA/IFB/IFC pins set to strong driver, DATA pin set to strong driver, fast edge
• Voltage spike filter on input pads disabled
• Two separate highly accurate single bit SD-ADC

优势:
• Giant Magneto Resistance (GMR)-based principle
• Integrated magnetic field sensing for angle measurement
• 360° angle measurement with revolution counter and angle speed measurement
• Max. 1.9° angle error over lifetime and temperature-range with activated auto-calibration
• Synchronous Serial Communication (SSC) with 15 bit representation of absolute angle value (0.01° resolution)
• Incremental Interface (IIF) with 12 bit resolution of angle value on the output (one count per 0.088° angle step)
• Incremental Interface (IIF) in A/B mode with absolut count enabled (provides absolute value at output)
• Fast angle update period (42.7μs)
• Autocalibration mode 1 enabled
• Prediction disabled
• Hysteresis set to 0.703°
• Bus mode operation of multiple sensors on one line is possible with SSC in open-drain configuration
• Diagnostic functions and status information
• IFA/IFB/IFC pins set to push-pull output
• Bi-directional SSC interface. DATA pin set to push-pull output with 8Mbit/s baud rate (2Mbit/s in open-drain)
• IFA/IFB/IFC pins set to strong driver, DATA pin set to strong driver, fast edge
• Voltage spike filter on input pads disabled
• Two separate highly accurate single bit SD-ADC

简介

TLI5012BE1000属于传感器变送器的位置传感器-角度、线性位置测量。由制造生产的TLI5012BE1000位置传感器 - 角度、线性位置测量角度和线性位置测量传感器使用电容、霍尔效应、电感、LVDT、LVIT、磁阻、光学或电阻技术，来确定传感器的致动器相对于参考点的位置。角度位置传感器可根据有限或连续旋转范围内的电气或机械范围进行区分。线性位置传感器可根据 0 到 400 英寸的范围进行区分。其他考虑因素包括致动器类型、输出类型和信号、安装类型和线性度。