TLE5012BE5020中文资料SPI/PWM, GMR, SMD数据手册Infineon规格书

描述 Description

XENSIV™- TLE5012B E5020 magnetic angle sensor with PWM - open-drain configuration - interface

特性 Features

• Giant Magneto Resistance (GMR)-based principle
• Integrated magnetic field sensing for angle measurement
• 360° angle measurement with revolution counter and angle speed measurement
• Two separate highly accurate single bit SD-ADC
• 15 bit representation of absolute angle value on the output (resolution of 0.01°)
• 16 bit representation of sine / cosine values on the interface
• Max. 1.0° angle error over lifetime and temperature-range with activated auto-calibration
• Bi-directional SSC Interface up to 8 Mbit/s
• Supports Safety Integrity Level (SIL) with diagnostic functions and status information
• Interfaces: SSC, PWM, Incremental Interface (IIF), Hall Switch Mode (HSM), Short PWM Code (SPC, based on SENT protocol defined in SAE J2716)
• Output pins can be configured (programmed or pre-configured) as push-pull or open-drain
• Bus mode operation of multiple sensors on one line is possible with SSC or SPC interface
• 0.25 µm CMOS technology
• Automotive qualified: -40°C to 150°C (junction temperature)
• ESD > 4 kV (HBM)
• TLE5012B E5000: with PWM (push-pull configuration) interface
• TLE5012B E5020: with PWM (open-drain configuration) interface
• RoHS compliant (Pb-free package)
• Halogen-free
PRO-SIL™ Features

• Test vectors switchable to ADC input (activated via SSC interface)
• Inversion or combination of filter input streams (activated via SSC interface)
• Data transmission check via 8-bit Cyclic Redundancy Check (CRC) for SSC communication and 4-bit CRC nibble for SPC interface
• Built-in Self-test (BIST) routines for ISM, CORDIC, CCU, ADCs run at startup
• Two independent active interfaces possible
• Overvoltage and undervoltage detection

优势:
• Test vectors switchable to ADC input (activated via SSC interface)
• Inversion or combination of filter input streams (activated via SSC interface)
• Data transmission check via 8-bit Cyclic Redundancy Check (CRC) for SSC communication and 4-bit CRC nibble for SPC interface
• Built-in Self-test (BIST) routines for ISM, CORDIC, CCU, ADCs run at startup
• Two independent active interfaces possible
• Overvoltage and undervoltage detection

简介

TLE5012BE5020属于传感器变送器的位置传感器-角度、线性位置测量。由制造生产的TLE5012BE5020位置传感器 - 角度、线性位置测量角度和线性位置测量传感器使用电容、霍尔效应、电感、LVDT、LVIT、磁阻、光学或电阻技术，来确定传感器的致动器相对于参考点的位置。角度位置传感器可根据有限或连续旋转范围内的电气或机械范围进行区分。线性位置传感器可根据 0 到 400 英寸的范围进行区分。其他考虑因素包括致动器类型、输出类型和信号、安装类型和线性度。