TLE5011数据手册传感器变送器的位置传感器-角度、线性位置测量规格书PDF

描述 Description

The TLE5011 is a 360° angle sensor that detects the orientation of a magnetic field by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. Data communications are accomplished with a bi-directional Synchronous Serial Communication (SSC) interface that is SPI compatible. The sine and cosine values can be read out digitally. These signals can be digitally processed to calculate the angle orientation of the magnetic field (magnet). This calculation can be done by using a COordinate Rotation DIgital Computer (CORDIC) algorithm. It is possible to connect more than one TLE5011 to one SSC interface of a microcontroller for redundancy or any other reason. If multiple TLE5011 devices are used, the synchronization of the connected TLE5011 is performed by a broadcast command. Each connected TLE5011 can be addressed by a dedicated Chip Select CS pin.

特性 Features

• Giant Magneto Resistance (GMR)-based principle
• Integrated magnetic field sensing for angle measurement
• Designed for 3.3 V and 5 V systems
• Full 0 - 360° angle measurement
• Highly accurate single-bit SD-ADC
• 16-bit representation of sine / cosine values on the interface
• Wide magnetic operating range: 30mT to 50mT
• Bi-directional SSC interface up to 2 Mbit/s
• 3-pin SSC interface, SPI compatible with open drain
• ADCs and filters synchronized with external commands via SSC
• Test resistors for simulating angle values
• Core supply voltage 2.5 V
• 0.25-μm CMOS technology
• Automotive qualified: -40°C to +150°C (junction temperature)
• Latch-up immunity according JEDEC standard
• ESD > 4 kV (HBM)
• Green package with lead-free (Pb-free) plating

优势:

应用 Application

• Steering angle
• Brushless DC motor commutation (e.g. Electric Power Steering (EPS))
• Rotary switch
• General angular sensing

简介

TLE5011属于传感器变送器的位置传感器-角度、线性位置测量。由制造生产的TLE5011位置传感器 - 角度、线性位置测量角度和线性位置测量传感器使用电容、霍尔效应、电感、LVDT、LVIT、磁阻、光学或电阻技术，来确定传感器的致动器相对于参考点的位置。角度位置传感器可根据有限或连续旋转范围内的电气或机械范围进行区分。线性位置传感器可根据 0 到 400 英寸的范围进行区分。其他考虑因素包括致动器类型、输出类型和信号、安装类型和线性度。