2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

文件：254.58 Kbytes 页数：28 Pages

PHI

飞利浦

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

文件：765.81 Kbytes 页数：27 Pages

恩XP

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

文件：765.81 Kbytes 页数：27 Pages

恩XP

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

文件：254.58 Kbytes 页数：28 Pages

PHI

飞利浦

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

文件：765.81 Kbytes 页数：27 Pages

恩XP

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

Overview \nThe TDA8552T is a two channel audio power amplifier that provides an output power of 2 x 1.4 W into an 8 Ω load using a 5 V power supply. The circuit contains two BTL power amplifiers, two digital volume controls and standby/mute logic. Volume and balance of the amplifiers are controlled \n\nOne pin digital volume control (for each channel)\n\nVolume setting with up/down pulses\n\nAuto repeat function on volume setting\n\nHeadphone sensing\n\nMaximum gain set by selection pin\n\nLow sensitivity for EMC radiation\n\nInternal feedback resistors\n\nFlexibility in use\n\nFew external co;

恩XP

恩智浦

2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing

Overview \nThe TDA8552T is a two channel audio power amplifier that provides an output power of 2 x 1.4 W into an 8 Ω load using a 5 V power supply. The circuit contains two BTL power amplifiers, two digital volume controls and standby/mute logic. Volume and balance of the amplifiers are controlled \n\nOne pin digital volume control (for each channel)\n\nVolume setting with up/down pulses\n\nAuto repeat function on volume setting\n\nHeadphone sensing\n\nMaximum gain set by selection pin\n\nLow sensitivity for EMC radiation\n\nInternal feedback resistors\n\nFlexibility in use\n\nFew external co;

恩XP

恩智浦