EAST/WEST CORRECTION FOR DIGITAL TV-SETS

LOW POWER DISSIPATION PULSE WIDTH MODULATOR FOR SWITCH MODE OPERATION OUTPUT SINK CURRENT UP TO 800mA OUTPUT SOURCE CURRENT UP TO 100mA HIGH IMPEDANCE INPUT AMPLIFIER DESCRIPTION The TDA8147 is a monolithic integrated circuit avail- able in three different packages: minidip, p

文件：90.82 Kbytes 页数：2 Pages

STMICROELECTRONICS

意法半导体

EAST/WEST CORRECTION FOR DIGITAL TV-SETS

LOW POWER DISSIPATION PULSE WIDTH MODULATOR FOR SWITCH MODE OPERATION OUTPUT SINK CURRENT UP TO 800mA OUTPUT SOURCE CURRENT UP TO 100mA HIGH IMPEDANCE INPUT AMPLIFIER DESCRIPTION The TDA8147 is a monolithic integrated circuit avail- able in three different packages: minidip, p

文件：90.82 Kbytes 页数：2 Pages

STMICROELECTRONICS

意法半导体

2.5G Multi-rate SONET/SDH Transceiver Family

GENERAL DESCRIPTION The VSC8142, VSC8145 and VSC8147 are extended multi-rate transceivers with integrated Clock Recovery Unit (CRU) and Clock Multiplier Unit (CMU) for use in SONET/SDH, DWDM, and other optical transport systems. The devices perform all required serialization and deserialization

文件：540.42 Kbytes 页数：2 Pages

VITESSE

Triple Differential Driver for Wideband Video

GENERAL DESCRIPTION The AD8146/AD8147/AD8148 are high speed triple, differential or single-ended input to differential output drivers. The AD8146 and AD8147 have a fixed gain of 2, and the AD8148 has a fixed gain of 4. They are all specifically designed for the highest resolution component video

文件：584.95 Kbytes 页数：24 Pages

AD

亚德诺

10 V/5.0 V Low Dropout Dual Regulator with ENABLE

The CS8147 is a 10 V/5.0 V dual output linear regulator. The 10V ±5.0 output sources 500 mA and the 5.0 V ±3 output sources 70 mA. The secondary output is inherently stable and does not require an external capacitor. The on board ENABLE function controls the regulator’s two outputs. When ENABLE i

文件：85.6 Kbytes 页数：12 Pages

ONSEMI

安森美半导体

10V/5V Low Dropout Dual Regulator with ENABLE

Description The CS8147 is a 10V/5V dual output linear regulator. The 10V ±.5 output sources 500mA and the 5V ±3 output sources 70mA. The secondary output is inherently stable and does not require an external capacitor. The on board ENABLE function controls the regulatorÕs two outputs. When ENABL

文件：173.16 Kbytes 页数：8 Pages

CHERRY