2 x 25 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output voltage swing is needed. The device is primarily develo

文件：268.62 Kbytes 页数：32 Pages

PHI

PHI

2 x 25 W high efficiency car radio power amplifier

GENERAL DESCRIPTION The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output voltage swing is needed. The device is primarily develo

文件：268.62 Kbytes 页数：32 Pages

PHI

PHI

High efficiency 2 X 25 W/4 stereo car radio power amplifier

GENERAL DESCRIPTION The TDA1564 is a monolithic power amplifier in a 17-lead single-in-line (SIL) plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is pri

文件：224.37 Kbytes 页数：30 Pages

PHI

PHI

High efficiency 2 X 25 W/4 stereo car radio power amplifier

GENERAL DESCRIPTION The TDA1564 is a monolithic power amplifier in a 17-lead single-in-line (SIL) plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is pri

文件：224.37 Kbytes 页数：30 Pages

PHI

PHI

High efficiency 2 X 25 W/4 stereo car radio power amplifier

GENERAL DESCRIPTION The TDA1564 is a monolithic power amplifier in a 17-lead single-in-line (SIL) plastic power package. It contains two identical 25 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is pri

文件：224.37 Kbytes 页数：30 Pages

PHI

PHI

I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

AM receiver circuit

GENERAL DESCRIPTION The TDA1572 integrated AM receiver circuit performs all the active functions and part of the filtering required of an A radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can be used for oscillator frequencies up to 50 MHz and can

文件：229.81 Kbytes 页数：19 Pages

PHI

PHI

AM receiver

GENERAL DESCRIPTION The TDA1572T integrated AM receiver circuit performs all the active functions and part of the filtering required of an AM radio receiver. It is intended for use in mains-fed home receivers and car radios. The circuit can be used for oscillator frequencies up to 50 MHz and ca

文件：221.66 Kbytes 页数：20 Pages

PHI

PHI