I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

I2C-bus controlled dual channel 46 W/2 OHM, single channel 92 W/1 OHM amplifier

General description The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package. Features Operates in I2C-bus mode and non-I2C-bus mode TH version: fo

文件：299.19 Kbytes 页数：46 Pages

恩XP

I2C-bus controlled dual channel 46 W/2 W, single channel 92 W/1 W amplifier with load diagnostic features

文件：299.19 Kbytes 页数：46 Pages

PHI

飞利浦

I2C-bus controlled dual channel 46 W/2 Ohm, single channel 92 W/1 Ohm amplifier with load diagnostic features

Overview The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package.\nThe TDA1566 can be controlled with or without I²C-bus. With I²C-bus control gain settings per c Operates in I²C-bus mode and non-I²C-bus mode\nTH version: four I²C-bus addresses controlled by two pins; J version: two I²C-bus addresses controlled by one pin\nTwo 4 Ω or 2 Ω capable BTL channels or one 1 Ω capable BTL channel\nLow offset\nPop free off/standby/mute/operating mode transitions\nSpea;

恩XP

恩智浦

I2C-bus controlled dual channel 46 W/2 Ohm, single channel 92 W/1 Ohm amplifier with load diagnostic features

The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package.\nThe TDA1566 can be controlled with or without I²C-bus. With I²C-bus control gain settings per channel an Operates in I²C-bus mode and non-I²C-bus mode\nTH version: four I²C-bus addresses controlled by two pins; J version: two I²C-bus addresses controlled by one pin\nTwo 4 Ω or 2 Ω capable BTL channels or one 1 Ω capable BTL channel\nLow offset\nPop free off/standby/mute/operating mode transitions\nSpea;

恩XP

恩智浦